Giant Tech CT-416
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 8 of 8
  1. #1

    Giant Tech CT-416

    Hello all;
    ISO either wiring diagram, or plug arrangement on the lower ( power) board connectors..
    Had to repair the basically brand new unit, after a 220v wire came loose and fried the input switching FET's...

    BUT, I misplaced the connectors chart for it..Now all I need is: either a diagram, or somebody with a similar unit that could guide me..
    All that is left are two(2), 2-wire connectors, #1 is the gas solenoid Green/ Green .... #2 is coming from P8 at the upper H35617 board, Red/ Green....

    Help !..

    Ricardo

  2. #2

    Re: Giant Tech CT-416

    Actually, it's a CAT-416...Don't know if that makes any difference, but...

    Ricardo

  3. #3
    Join Date
    Mar 2010
    Location
    Delaware
    Posts
    2,682

    Re: Giant Tech CT-416

    Call me if you can't get it figured out, I will tell you how to test it.
    www.georgesplasmacuttershop.com
    Plasma Cutter and Welder Sales and Repairs--Ebay store
    Primeweld dealer and tech support
    Tec.Mo. Dealer Consumables for the PT and IPT torch's

  4. #4

    Re: Giant Tech CT-416

    Much appreciated..! Will do..
    Ricardo

  5. #5
    Join Date
    Nov 2007
    Location
    New Hampshire
    Posts
    406

    Re: Giant Tech CT-416

    I might be able to help.
    http://www.PlasmaMetalCutter.com

    GiantTech Cut40D
    GiantTech Cut50D
    GiantTech CT520D
    GiantTech Tig200s
    GiantTech Arc200
    GiantTech Tig200PACDC
    Miller MM210
    No Brand Chinese Chop Saw
    No Brand Chinese 4" Angle Grinder

  6. #6

    Re: Giant Tech CT-416

    Thx, will send PM...
    Ricardo

  7. #7

    Re: Giant Tech CT-416

    Larry; Any other way to contact you ?

    Ricardo

  8. #8

    Re: Giant Tech CT-416

    Well, in a few words: It's alive !.. Passed the smoke test with flying colors...

    Had to change the main switch and the air regulator that came with it; they simply broke apart.
    Nothing major; eBay had some nice ones, only in blue, and I had a new regulator in a shelf..

    Today I ran a few 6013 rods on stick mode, tomorrow I'll be testing plasma and TIG, for sure..!

    Thanks to George ( mechanic416 ) for his tips and time on the phone...

    We're back !

    Ricardo

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement