Hey guys, I was wondering if anyone who has a Lincoln Squarewave 175 would mind taking a quick voltage reading with a volt meter for me? The pedal is supposedly a 10K ohm potentiometer, and I am trying to find out what voltage is being used here. I have it in my notes that its 5V, but I'm not sure that's accurate.

With the machine on, amps turned up all the way, can you measure between pin A and pin C? (Black probe on C, red probe on A).

Can you also measure between pin B and pin C? (Black probe on C, red probe on B). With the pedal up you should get about 0 volts, and as you press the pedal down the voltage will increase. Can you tell me how high the voltage goes when pressing it down all the way?

Thanks guys and any help is greatly appreciated!
-Matt