Miller s32p wire feeder problem
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 5 of 5
  1. #1
    Join Date
    May 2014
    Location
    South GA
    Posts
    6

    Miller s32p wire feeder problem

    I just acquired a miller s32p wire feeder when i hook it up to my trailblazer and turn it on and adjust the wire feed it starts feeding wire. Pulling the trigger on the gun has no affect on it. I swaped out the gun and it has no affect

  2. #2
    Join Date
    Mar 2010
    Location
    Ceres, California
    Posts
    3,304

    Re: Miller s32p wire feeder problem

    Unplug the gun trigger. see if it stops. Might have a gun problem. Or a control pcb is bad.

  3. #3
    Join Date
    May 2014
    Location
    South GA
    Posts
    6

    Re: Miller s32p wire feeder problem

    Yeah ive tried unplugging the the gun. Same thing its like once you turn the power switch on the motor has power and starts feeding wire

  4. #4
    Join Date
    May 2014
    Location
    South GA
    Posts
    6

    Re: Miller s32p wire feeder problem

    Ok so I’ve unplugged the gun it won’t feed with the gun unhooked. But I took the new m25 gun off my millermatic 200 and it’s the same way. So the gun is not the problem


    Sent from my iPhone using Tapatalk

  5. #5
    Join Date
    Jul 2012
    Posts
    623

    Re: Miller s32p wire feeder problem

    Check ground wire/ cable or replace it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement