Bobcat 250 battery replacement
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 9 of 9
  1. #1
    Join Date
    Apr 2012
    Location
    Western Kentucky
    Posts
    193

    Bobcat 250 battery replacement

    What’s the simplest way of getting it out of there?
    Miller Bobcat 250
    Syncrowave 200
    Millermatic 252
    Spoolmatic 30A
    Spectrum 625 X-Treme
    Maxstar 150S
    Victor O/A torches
    Dewalt angle grinders

    Welded on/off for over 40 years.

  2. #2
    Join Date
    Dec 2013
    Location
    Mount Tabor VT
    Posts
    5,180

    Re: Bobcat 250 battery replacement

    I don't know, never gave it a thought. Last I knew I loosened cables, and lifted. I don't think it was hard. If it was, I don't remember. Bit of a pain to attach a charger. A couple weekends ago it was pretty cold. A tractor wouldn't start without ether, the on board injection was empty, so I was going to use the Bobcat to power battery, and heater. It wouldn't start, (battery is three years old). I strung cords, opened both doors to connect charger, and it started instantly. I moved the cord to the tractor, and it started instantly. They were both just training me.
    An optimist is usually wrong, and when the unexpected happens is unprepared. A pessimist is usually right, when wrong, is delighted, and well prepared.

  3. #3
    Join Date
    Mar 2017
    Location
    bar stool
    Posts
    2,104

    Re: Bobcat 250 battery replacement

    Write a check for Welder Service to come out & install a new battery.

  4. #4
    Join Date
    Oct 2016
    Posts
    39

    Re: Bobcat 250 battery replacement

    New or old? The older ones had a tray that slid out. The new ones you have to take the back panel off I believe.

  5. #5
    Join Date
    Apr 2012
    Location
    Western Kentucky
    Posts
    193

    Re: Bobcat 250 battery replacement

    It’s only about 3 years old if I recall.
    Miller Bobcat 250
    Syncrowave 200
    Millermatic 252
    Spoolmatic 30A
    Spectrum 625 X-Treme
    Maxstar 150S
    Victor O/A torches
    Dewalt angle grinders

    Welded on/off for over 40 years.

  6. #6
    Join Date
    Mar 2017
    Location
    bar stool
    Posts
    2,104

    Re: Bobcat 250 battery replacement

    Have you gone to Millerwelds site and looked up the manual?
    That would probably have pictures and a procedure.

  7. #7
    Join Date
    Apr 2008
    Location
    NW ON Canada
    Posts
    3,047

    Re: Bobcat 250 battery replacement

    Rear panel needs to be removed. Not a big deal.
    Jason
    Lincoln Idealarc 250 stick/tig
    Thermal Dynamics Cutmaster 52
    Miller Bobcat 250
    Torchmate CNC table
    Thermal Arc Hefty 2
    Ironworkers Local 720

  8. #8
    Join Date
    Aug 2013
    Location
    Atlanta GA USA
    Posts
    18

    Re: Bobcat 250 battery replacement

    Below is for the mid-engine

    Name:  Untitlegbhfdsd.png
Views: 61
Size:  63.9 KB

  9. #9
    Join Date
    Apr 2008
    Location
    NW ON Canada
    Posts
    3,047

    Re: Bobcat 250 battery replacement

    Was looking at mine today. There is 8 bolts (3/8" head) and 4 Phillips head screws that need to be removed. This will allow removal of the rear panel and access to the battery.
    Jason
    Lincoln Idealarc 250 stick/tig
    Thermal Dynamics Cutmaster 52
    Miller Bobcat 250
    Torchmate CNC table
    Thermal Arc Hefty 2
    Ironworkers Local 720

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement