350EXT Questions
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 2 of 2
  1. #1

    350EXT Questions

    So I just purchased a couple new Everlast welders and those being the 275p mig and the 350ext tig w/w400 watercooler. I am still waiting on the tig to show up because for some reason there is a hold up on them arriving from the manufacture. well onto the question at hand is I would like to know 2 things about the tig that I have not been able to find out and those are the height of the machine from the bottom of the feet to the top of the machine and when it sits down on the chanels of the w400 watercooler does it truly mate up to it and connect like the Dynasty's do? I am going to be building some Nice custom carts for these machines that all match in height and style. I need to get material and would like to get started on the build but need to find out all the measurement for the Tig 350ext first before bending up expensive Chromoly tubing. If anyone has any newer reviews on the machine that would also be very welcome.

  2. #2
    Join Date
    Nov 2008
    south GA where its hot in summer and cold in winter

    Re: 350EXT Questions

    The dimensions are here:

    It mates together in the slots of the channel on top of the cooler, and the channel that serves as the feet of the welder goes down into it to nest. I'm not sure how the Dynasty connects. Regardless, though, I would not build until I had it in hand for the best
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement