Lo-Hi switch needed for Beta-MIG 250
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 5 of 5
  1. #1
    Join Date
    Dec 2010
    Posts
    72

    Lo-Hi switch needed for Beta-MIG 250

    I need a Lo-Hi range switch for my Beta-MIG 250 welder. I have spent some time looking on line but can't find anything. My local welder repair shop says they can't get one but can make up something that would work. I would prefer an original if possible. Anyone out there have a parts machine or know somewhere that might have one? Thank you

  2. #2
    Join Date
    Feb 2016
    Location
    Ohio
    Posts
    2

    Re: Lo-Hi switch needed for Beta-MIG 250

    Go to this site and ask your question, there are Hobart techs that will answer your question.

    https://weldtalk.hobartwelders.com/

  3. #3
    Join Date
    Dec 2010
    Posts
    72

    Re: Lo-Hi switch needed for Beta-MIG 250

    Quote Originally Posted by 66vette View Post
    Go to this site and ask your question, there are Hobart techs that will answer your question.

    https://weldtalk.hobartwelders.com/
    Thanks, I will try that.

  4. #4

    Re: Lo-Hi switch needed for Beta-MIG 250

    Did you find the switch? Mine broke years ago and I made one from trex deck plastic decking. Works great still today!

  5. #5
    Join Date
    Dec 2010
    Posts
    72

    Re: Lo-Hi switch needed for Beta-MIG 250

    Thanks for the reply. No, I haven't been able to find one so I am considering making a plastic slide to hold the copper bar. Glad to know it is doable and will work.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement