MP210 and Tomahawk 1000 Securement
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 2 of 2
  1. #1
    Join Date
    Feb 2019
    Columbus, Ohio-ish

    MP210 and Tomahawk 1000 Securement

    Howdy all.

    I’m now the owner of a brand new MP210 and Tomahawk 1000. So far all I have done is unbox each unit to get to their power cords so I could see what outlets I would need to purchase when I made my generator adapter cord. Success with that today.

    One of the first projects I’m going to make is obviously a cart. I’m still uncertain if I’ll do one cart for both, or separate them since I’ll need the air compressor with the 1000. I’m leaning more towards both on one cart and run an airline over to the cart.

    Anyhow, are there provisions on each unit to secure them down? Do most even bother to secure them down? Why would I not want to secure them?

    I’m brand new to welding, so I’ll absolutely have questions as I go, and learn.

    Thanks y’all.

  2. #2
    Join Date
    Dec 2013

    Re: MP210 and Tomahawk 1000 Securement

    I don't have a Tomahawk but I do have a 210MP. I secured it to my cart so if I have to roll the cart around outside it remains where I put it. At the same time I wanted it easily removable in case I want to carry it further afield. You can see what I did here around post 398 :!!/page16

    Just depends on what you want to do.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement