Free range selector / rheostat for the Hobart GR303
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 8 of 8
  1. #1
    Join Date
    Jul 2011
    Location
    Lafayette, LA
    Posts
    13

    Free range selector / rheostat for the Hobart GR303

    This control panel is all I have left from a GR303 that I dismantled about 7 years ago. I don't have the heart to throw it in the garbage, because there must be someone out there that is looking for a range selector. I'm not saying that I know it works, but heck, its free.

    Just pay the shipping and its yours.

    Note: I can't get the set screw loose so I cannot remove the range selector from the panel. I may have to destroy the panel to get it out (or just send you the whole panel!).

    Thanks
    Attached Images Attached Images  

  2. #2
    Join Date
    Feb 2019
    Posts
    10

    Re: Free range selector / rheostat for the Hobart GR303

    I wonder if that's pretty close to the same range selector that I have on my Hobart g-213? If so I would interested in the fine control adjustment rheostat that's in the middle of the range selector

  3. #3
    Join Date
    Feb 2019
    Posts
    10

    Re: Free range selector / rheostat for the Hobart GR303

    I think of you bust off the small knob in the middle,you'll fine 3 screws which hold the small alum dial in place,remove them and the dial will come loose,then there are 3 more screws and the large hand wheel will come loose and then you can remove the 3 screws on the outside of the housing and the range selector should come loose.

  4. #4
    Join Date
    Feb 2019
    Posts
    10

    Re: Free range selector / rheostat for the Hobart GR303

    joestewart,I haven't heard from you,did you get rid of the range selector?

  5. #5
    Join Date
    Apr 2006
    Location
    Soda springs,Id
    Posts
    4,576

    Re: Free range selector / rheostat for the Hobart GR303

    have you tried a PM to him?
    Mike
    Ol' Stonebreaker
    "Experience is the name everyone gives to their mistakes"

    Miller 175 mig
    Miller thunderbolt ac/dc stick
    Victor O/A setup
    Makita chop saw

  6. #6
    Join Date
    Jul 2011
    Location
    Lafayette, LA
    Posts
    13

    Re: Free range selector / rheostat for the Hobart GR303

    Sorry about that! I haven't checked the thread in a few days. Yes, I still have the range selector. I'll have to bust off that little plastic knob in the center to get it all off though. Let me know if you are interested. PM me your mailing address. Should fit in one of the "flat rate boxes" that the post office has......

  7. #7
    Join Date
    Feb 2019
    Posts
    10

    Re: Free range selector / rheostat for the Hobart GR303

    I've sent you a PM with my address.thanks

  8. #8
    Join Date
    Feb 2019
    Posts
    10

    Re: Free range selector / rheostat for the Hobart GR303

    a great big thanks to joestewart for sending me the Gr303 range selector.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement