Wiring a remote switch on a pt 40 plasma torch
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 4 of 4
  1. #1

    Wiring a remote switch on a pt 40 plasma torch

    Looking for help/ advice about wiring a remote switch for my pt 40 torch. I mostly use my plasma cutter on a homemade (old drafting machine mechanism) plasma cutting guide. Currently I use a mechanical device to pull the trigger....I was thinking a remote switch might be better. Any insights?
    Attached Images Attached Images  

  2. #2
    Join Date
    Mar 2010
    Location
    Delaware
    Posts
    2,818

    Re: Wiring a remote switch on a pt 40 plasma torch

    Its a simple operation. Take the cover off unplug the switch wires from J13 and J14. Then plug your wires in to J13 and J14 from your switch, push switch torch turns on, let off switch torch will go off.
    Attached Images Attached Images  
    www.georgesplasmacuttershop.com
    Plasma Cutter and Welder Sales and Repairs--Ebay store
    Tec.Mo. Dealer Consumables for the PT and IPT torch's

  3. #3

    Re: Wiring a remote switch on a pt 40 plasma torch

    Is that 120 volts? Push button best?

    Thanks for your input!

  4. #4
    Join Date
    Mar 2010
    Location
    Delaware
    Posts
    2,818

    Re: Wiring a remote switch on a pt 40 plasma torch

    There is no voltage there, any push button switch will work.
    www.georgesplasmacuttershop.com
    Plasma Cutter and Welder Sales and Repairs--Ebay store
    Tec.Mo. Dealer Consumables for the PT and IPT torch's

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement