Miller MM200 with 14 pin connector questions
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 3 of 3
  1. #1

    Miller MM200 with 14 pin connector questions

    I have a Miller MM200 with the 14 pin connector. I am wanting to add a spool gun to it for welding aluminum. I know the Spoolmatic 3 is a direct fit but they are hard to find. Is it possible to buy a different spool gun and then put a replacement 14 pin connector on the spool gun as long as all 4 wires are hooked up to the correct pins?

  2. #2
    Join Date
    Jun 2016
    Location
    Aynor SC
    Posts
    3,966

    Re: Miller MM200 with 14 pin connector questions

    CALL USA Weld https://www.usaweld.com/

  3. #3
    Join Date
    Oct 2015
    Posts
    2,355

    Re: Miller MM200 with 14 pin connector questions

    I have a spoolmatic 3 that I purchased new with my MM200. I would sell the spoolmatic 3 for $350 + shipping. It works great and I have never had a problem with it. I got a 30A a couple years ago for another welder I have . I closed my shop so I do not need 2 spool guns any more. PM me if your interested. I will say it does not look new but is not all busted up either, just normal wear and tear . I just did not want you thinking it looks like new.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement