Zenith carb fuel inlet threads
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 4 of 4
  1. #1
    Join Date
    Feb 2011
    Posts
    155

    Zenith carb fuel inlet threads

    I bought a new zenith carb a few months ago and it has been working great. I noticed there was some fuel spilled beneath it today. Figured it was flooding. I found the inlet threads to be cracked where the elbow screws in. Is there anyway to fix it other than buy another carb?

  2. #2
    Join Date
    Oct 2018
    Posts
    47

    Re: Zenith carb fuel inlet threads

    Short a a new carb you might wish to JB weld your elbow in. Just make sure you allow it to fully cure before use.

  3. #3
    Join Date
    Feb 2011
    Posts
    155

    Re: Zenith carb fuel inlet threads

    That’s what I was going to try. Just trying to see if anyone else had any suggestions.

  4. #4
    Join Date
    Sep 2005
    Location
    Cave Creek AZ
    Posts
    2,782

    Re: Zenith carb fuel inlet threads

    You can take it all apart and silver solder the crack. Teflon tape is the chief reason for cracks like that, dont use it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement