Shield fogging, what do you pros use?

[driz]

I’m not a fan of wearing safety glasses all the time. I prefer like hearing stuff to have them all over yo toss on and off again. I normally prefer to use a shield, why ,it’s simple. I just won’t like most everyone else who is honest keep guards on my grinders. I’d rather tuck my chin and be careful.
My one gripe is fogging! About the best I can do here in cold country is to breath out the side of my mouth as gently as possible. Put on a 3m dust respirator and forget it, almost hopeless. Any fantastic antifogs out there you find actually work??

[Louie1961]

Put on a 3M down draft respirator like one of these, and your hood or shield will never fog.

https://www.amazon.com/3M-Respirator...75MNG4Z0PHY5HP

[driz]

Put on a 3M down draft respirator like one of these, and your hood or shield will never fog.

https://www.amazon.com/3M-Respirator...75MNG4Z0PHY5HP

Dohhhh, Homer Simpson time. I’ve been buying those 6000s for years and never once thought to wonder why those others looked different! Somebody kick me

[CAVEMANN]

Yep, they are good respirators, light, compact & cheap, I remember back in the day I had a facepiece that had 2 hoses that placed the filter cartridges behind you, sometimes they still interfered with your hood, they were expensive, for what they were

[E T]

Another vote for the 3M 7500.
I just got one myself and no more fogging of safety glasses and welding helmet. Another plus is they seal so much better on your face than the disposable respirator caps. With the diposable ones there's always a gap somewhere so you still breath in some of the bad stuff and have black gunk coming out of your nose after grinding or welding.

[driz]

Definitely gonna grab one of those. Those small P 100s I have a bag of should fit on there nicely enough. They’re flex as I ain’t Choosey


Sent from my iPhone using Tapatalk

[TimmyTIG]

For cold weather fogging I like to heat the lenses up with a hair dryer.

[docwelder]

I’m not a fan of wearing safety glasses all the time. I prefer like hearing stuff to have them all over yo toss on and off again. I normally prefer to use a shield, why ,it’s simple. I just won’t like most everyone else who is honest keep guards on my grinders. I’d rather tuck my chin and be careful.
My one gripe is fogging! About the best I can do here in cold country is to breath out the side of my mouth as gently as possible. Put on a 3m dust respirator and forget it, almost hopeless. Any fantastic antifogs out there you find actually work??

got this from mine safety appliances.

[tracymobilecnc]

personally i think every weld mask should come with a respirator like stated (not really, because be free do as you want as long as it dont harm others) but they really should always wear a resp and a hood welding.

no matter if you work hard enough long enough it will all fog. first step is fog wipes or spit. next step is forced air. miller makes a good unit as do others