Sa200 zenith float spring help
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 5 of 5
  1. #1
    Join Date
    Oct 2010
    Location
    Up North , New York
    Posts
    167

    Sa200 zenith float spring help

    I took apart my zenith model 13720 carb on my sa200 to clean it . There is a small spring on the float and for the life of me I cant figure out how it goes back on . I've checked everywhere for a picture of it on there in the correct orientation and looked on YouTube and no luck. Any ideas on how it goes ?
    "I'd Rather die on my feet , than live on my knee's"

    64' Lincoln Sa 200 Redface Code 5496 - Sold
    72' Lincoln Idealarc 250 (Roundtop)
    MillerMatic Vintage

  2. #2
    Join Date
    Oct 2010
    Location
    Up North , New York
    Posts
    167

    Re: Sa200 zenith float spring help

    This is the spring

    Sent from my SM-G950U using Tapatalk
    "I'd Rather die on my feet , than live on my knee's"

    64' Lincoln Sa 200 Redface Code 5496 - Sold
    72' Lincoln Idealarc 250 (Roundtop)
    MillerMatic Vintage

  3. #3
    Join Date
    Nov 2012
    Location
    ROCKVILLE ,,VA
    Posts
    433

    Re: Sa200 zenith float spring help

    me can"t remember except goes on shaft that hold floats got pre load help hold float up ,, new rebuild kit come with updated V spring IN WHICH HOOKS TO FLOAT AND NEEDLE VALVE IN WHICH HELP PULL NEEDLE INLET VALVE LETTING GAS IN AND CLOSING

  4. #4
    Join Date
    Oct 2010
    Location
    Up North , New York
    Posts
    167

    Re: Sa200 zenith float spring help

    Thanks , I know I know it goes in the shaft I just cant tell where the let's go , if it needs to be tensioner a certain say or what . I'm stumped

    Sent from my SM-G950U using Tapatalk
    "I'd Rather die on my feet , than live on my knee's"

    64' Lincoln Sa 200 Redface Code 5496 - Sold
    72' Lincoln Idealarc 250 (Roundtop)
    MillerMatic Vintage

  5. #5
    Join Date
    Feb 2011
    Posts
    166

    Re: Sa200 zenith float spring help

    I don’t know if it will work for you, but I didn’t add mine back when I rebuilt my carb. My rebuild kit came with a hanger for the needle.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement