Plasma cutter 62204/ 64808 ground cable
RSS | Subscribe | Contact Us | Advertise | About Us
Results 1 to 4 of 4
  1. #1
    Join Date
    Sep 2019
    Posts
    10

    Plasma cutter 62204/ 64808 ground cable

    So a friend asked me to replace the ground cable on that machine, anyone know how it is connected on the inside the unit ? just a lug or is it wired into a board ? Wire is only 10' 8 AWG and very stiff, he wants it a little longer and, more flexible…..any thoughts ?
    Thanks in advance.

  2. #2
    Join Date
    Mar 2010
    Location
    Delaware
    Posts
    2,850

    Re: Plasma cutter 62204/ 64808 ground cable

    Its bolted to the PCB
    www.georgesplasmacuttershop.com
    Plasma Cutter and Welder Sales and Repairs--Ebay store
    Tec.Mo. Dealer Consumables for the PT and IPT torch's

  3. #3
    Join Date
    Sep 2019
    Posts
    10

    Re: Plasma cutter 62204/ 64808 ground cable

    Thanks for the reply, I took off the cover and see where it is located. Seems easy enough to modify, I'm thinking of putting a panel dinse
    connector on the front panel. Also I notice that when adjusting the max amp,led display only reads 33 amps...is that a problem or normal
    for a 40 amp machine.

  4. #4
    Join Date
    Dec 2016
    Posts
    191

    Re: Plasma cutter 62204/ 64808 ground cable

    it should read whatever the machine is rated for.
    is it a dual voltage unit?
    i would put a amp clamp on it and compare readings.
    it's possible the readout is not calibrated very well.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
RSS | Home | Penton Media | Contact Us | Subscribe | For Advertisers | Terms of Use | Privacy Statement