I just bought a miller 180 230v mig wirefeeder. I set it up with solid wire steel and c25.
I am welding like 1/4 flat bar to practice and I am wondering if any one of you experienced guys can give a beginner some tips if you see that my attached pic is a good weld or not. This is my final weld after a hour run of welding trying different settings,speeds and travels. Sorry if you guy think it a boring post but I am just making sure I am on the right track.
I will be practicing tomorrow when I build my metal table to mount my vise too.
![Image]()
![Image]()
I am welding like 1/4 flat bar to practice and I am wondering if any one of you experienced guys can give a beginner some tips if you see that my attached pic is a good weld or not. This is my final weld after a hour run of welding trying different settings,speeds and travels. Sorry if you guy think it a boring post but I am just making sure I am on the right track.
I will be practicing tomorrow when I build my metal table to mount my vise too.
