Ok this should be an easy one. Any special wire prep needed for connecting a Dinse connector on the cable? (for work clamp and lead). I've come across conflicting advice. Can I just use the set screw or is there a "right" way to do it? I've seen many folks soldering their crimps but being a set screw, wondering if that's it" Wam, bam, done?
My apologies for the onslaught of questions... but until now, I've been able to walk into my tech schools metal shop, grab a booth with a fully loaded Dyn 350 and start welding... I'm currently putting together a DC tig setup at home. Getting close! I appreciate every reply and many thanks to those who have taken the time to share their experience and knowledge.
- Kenneth
My apologies for the onslaught of questions... but until now, I've been able to walk into my tech schools metal shop, grab a booth with a fully loaded Dyn 350 and start welding... I'm currently putting together a DC tig setup at home. Getting close! I appreciate every reply and many thanks to those who have taken the time to share their experience and knowledge.
- Kenneth
