Activity Stream

One caution that you want to remember is that a standard wire gauge will read 2 gauge numbers LOWER than a U.S standard gauge for sheet and plate....

As I mentioned in previous threads, I have much the same vision problem and have tried most of the suggestions listed above but what works best for...

I’ve had more than a few of “those customers” over my lifetime. I’m not even gonna go there as they were so aggravating I have since moved on. ...

The standard old school transformer needs all of the 300 plus amps just to wet the puddle out like a 220 amp inverter can.. Only takes over 100 amps...

гипнотерапевт Tegs: обучение гаданию на таро https://videnie.org/study/taro/

I can't find them online:confused:

That was a compliment :D

^^^ive been called worse. You’ll have to do better than that Sent from my iPad using Tapatalk

You can cut mild steel up to about 3/8 in. thick using a ferrous-metal-cutting blade. Put on your safety gear, keep bystanders away, and cover...

^^ Hoarder...:D :laugh:

It's like a SPAM breakfast at the buffet... everyone is showing up :laugh:

Metal inert gas (MIG) welding can be successfully used to weld aluminum. When selecting a welder, it must be decided whether spray arc welding or...

There have been drastic increases globally in the price of hot-rolled steel — US$1,000 per tonne in the US, US$700 per tonne in Europe and US$650 per...

Sold my mill a few weeks ago. The buyer didn't want to buy the 4x4 mill vice with it so I will keep it for the drill press.

great idea

This year it has been near impossible to get generators. Orders are backed up months. The unavailability of generators seems to have made people...

Makes ya wanna buy a truckload of 6013, eh? :laugh:

Used Miller 22A bench feeders are fairly easy to find for $500 and up depending on condition. I went that route..... If you go...

Nice:)

Hello everyone. I'm glad that I came across this site because there are really a lot of people who understand what they are doing and know how to...

Ha ha, this is what happens when you step into a thread that is getting hammered!!! :laugh:

Now I’m thinking about it Maybe the reason why these glow plug relays go bad so often it’s because they stay on so damn long. This last generic...

In 25 years I think I replaced three of them. Genuine Ford parts. The last one I put in was a generic and that was about six or seven years ago...

You do nice work. Work light stands are good if you stay in one position, but go with LEDs as they're much cooler than halogen. If you move...

Looks good! Nice!

Hopefully my TIG with remote issue will be solved here soon. Even though my SSC Controls foot pedal is suppose to replace the Miller RJ45 P/N 300...

To drill a hole in a magnet, you will need to apply the tip of a power drill onto the surface of the magnet and gently push it down into the center....

Wow, just went through Pipe Fitter's message thread - just... Wow.

Thanks :) I was going to paint it but given the complexity of the shape I didn't want to risk screwing up spraying it. And I thought brushing it...

Don't get in a rush... scrap prices are coming back up...

If you were closer I drop you off some broken fingers from the John Deere combine's pickup. The three punches/chisel closest to the pen are made from...