Activity Stream

Not yet, but soon will.

@ Oscar thanks for the info. did you try welding to full capacity yet to see what the rpc really handles? noise when it loads up? voltage stability...

I second going around the corner before stopping. It is more difficult, but it teaches you to loosen up a bit, and takes the starts and stops out of...

That is not an engineered structure because he chose an ornamental square corner tube for a project that requires structural radius corner box...

Cool looking forge project. While you're working on the plumbing, I would however, replace those cheap black and white wheels with some chrome...

I'm sorry, I took your MIG as beginner TIG work. That's the goal MIG like TIG.

Thanks man. I will purchase those.

So I pulled the back cover out and nothing jumped out at me as being missing, disconnected etc. So, What a good way to test the Harris 355 regulator?...

7018 is the rod of choice if you want something to stay together. All the engineering mumbo jumbo won't matter for 95% of the projects done on this...

For strength you choose between 6011, and 7018. 6010 & 6011 are deep penetrating rods, both are fast freeze. They work well even on dirty steel,...

I strongly suggest the OP pays somebody with some real experience to do it right. That kind of experience does not happen overnight. Plus I smell...

I’m not sure if this was directed at me, but I’ll answer. I’ma beginner but kinda not. When I first start working in ship repair as a outside...

I would STRONGLY suggest that you get some experience and basic knowledge before attempting this, the aluminum cannot be welded to steel or stainless.

Welcome! Whereabouts in New Mexico, I lived in the bootheel until 1999.

I haven't followed the whole thread. I'm guessing you are a beginner. I saved my first project as a reminder of how far I've come. I grew up...

Yes, I will describe it, but no pics because it's not exactly up to code :laugh: This list goes in order sequentially where the line you are...

Not sure why I didn’t think about that since it makes perfect sense. Keeping up with the thread, I welded my lead holder together. I was hoping...

Thanks guys. So if I’m going to get into this a bit more and focus on structural steel type jobs, posts, beams, cleats etc, is 7018 the rod of...

Opus is a water head, just ignore him. Chains don't melt. That's why they should be chained.

@Oscar. can you recap the wiring and breaker arrangement? need to install my 30hp rpc also.

I replaced mine with the cheap ones off eBay. That was 7 years ago. Still running fine and the saw cuts straight. Use mine every week, not daily.

Welcome Sent from my LM-X420 using Tapatalk

Welcome Sent from my LM-X420 using Tapatalk

Welcome Sent from my LM-X420 using Tapatalk