Activity Stream

Sizing is Mig and Fluxcore at less for small 4,000 watts . It is better over 6,000 watts. Stick and Tig needs at less 9,000 watts. It better...

The modern High-Tech version of the Erector Sets and Lincoln Logs some of us grew up with?

It's ok as long as you didn't get a hankerin for chasing a ball after you vaxed yourself :laugh:

https://www.dignitymemorial.com/obituaries/jacksonville-fl/robert-maday-11757368

I got a really good buy on 40’ long sticks of 1-1/4” x 12 ga sq tube, so that’s what I built all the fence out of. These are my hangers I built...

Good to hear some practical experience of things that work. Do you have a model number for the generator?

I'd run it, esp if it was given to you. A lot more capable than the Lincoln. At least try it out and learn on it, before sending it down the road. ...

Maybe some were offered facetiously, or even sarcastically, and in a few cases, deservedly so? Most of the people I loath are politicians; the few...

I don't look much anymore but looks like it's holding.

I have had those same thoughts,, but, this machine is mostly for my 10 year old grandson,, If he goes through a dozen spools of wire,, it will be a...

I knew you'd like them and I'm pretty sure they're 1", on the slip bar one end will unscrew. I use one of them strictly with an impact so I took the...

for a efficient 220a inverter machine youll want a 8k inverter generator if you planed to weld at full power. me i wouldnt want nothing to do with a...

I'm thinking of grabbing any ole POS 500+ amp and up just to gouge with. I've been eyeing a Vantage 549X because I can get one for $27500 I'd love...

DuDe, Please,,, take your BS somewhere else!!!! I'm happy you've found something to believe in, but we just Don't Give a $hit what Fairy Tales you...

See the link in post #5

Will do!

On the Bestarc Mig 145. You can turn off the synergic mode, by pushing the knob in (clicks). Then it will use volts and wire speed (-30 to 30)....

Rancher76, Could you please share a picture or two of the lower rail joints to the vertical posts? I am going to make a fence, and looking for...

helper i had a while ago did this lovely work. cant really blame him as he doesnt know much

Against my better judgment I am going to point out the irony of how it would appear that you just described yourself. In the future please do not...

That job looks like it will require a ,,,,,,,,,,,,,,,, BIGGER TRUCK!! :blob1: LOL!!

Does any one know if there is a way members can send flowers to his family or grave sight if he is being buried?

Condolences and prayers.

Snapped a couple pictures of the last section of fence I did by my barn tonight, notched with the Metabo and welded out with 6011.

I was in the same predicament as you a year or two ago. (Full Credit, Louie1961, who has replied above, was the source of the following excellent...

Im new to the forum and you did your homework in what i need brother. Im interested in a kit if you are still selling them

Shovel **** my way, and I'll shovel it back. To the OP.................. Sorry, I'm outta here, I don't want to spoil your thread. Apologies.

I have no practical experience and have never welded using a generator. From info I've picked up along the way: get the biggest you can. The last...

Throw a guy a bone, and he's still a c'sucker(shrug)

Yes, Yes, you are. Spend more time on your projects and less time on the computer or in front of the TV. You might actually finish a project for...

Aw..........I'm just bein' a dik. I hope they do the job you need them to do.

Mini Maximus:D