Activity Stream

Assuming all methods are done correctly, TIG welding in my experience can only be beaten by MIG for speed if you are doing very large objects...

Pretty obvious where he's from. "Aluminium", never understood how an extra i got in there and "RAAF", Royal Australian Air Force. Sent from my...

That is not true, you can certainly ARC weld pipe that small. I have seen a lot of marine engine mounts and work stations that were welded as long as...

Lincoln electric has posted old pictures of their trucks from when they were a welding service(1940's-1950's). I only noticed because they have the...

https://www.millerwelds.com/resources/article-library/silicon-bronze-mig-brazing-basics Sent from my iPhone using Tapatalk

Not sure if you have a mig set up but Miller does have parameters for mig brazing. Sent from my iPhone using Tapatalk

I don’t know why anyone is wasting your time talking to an idiot like this. Just break out the BAN stick and be done with it. He is...

If all you want to do is heating, brazing and cutting (no welding) Victor and others make industrial setups that use regular size cylinders, not the...

Sounds like someone is still bitter about losing two wars to the Americans, the demise of the Empire, and the prospect of Charles as King! LOL

Can't be Bonzoo. For all his faults, Bonzoo could mig weld like nobody's business. No way Bonzoo would show a crappy weld like that on here. ;-)

Epic fail in ... how many days as a member on the forum? Ten? Twenty, max? GRRRRRRRRR! WOOOOOOOF! (By the way, that dog looks about as...

Alright guys, I watched a bunch of safety vids on youtube and found a chart that recommends settings for different uses along with a list of safety...

Depends on your viewpoint doesn't it? Your viewpoint just doesn't interest me I'm afraid. But as long as you dopes keep carrying on, I will too!

Welcome Sent from my LM-X420 using Tapatalk

You're only highlighting your own horrible attitude. Are you still on about the American thing? Cos you're not doing your own country any favours, as...

Just highlighting your stupidity!

Nice to hear on your bridging. I do this the same. Small button tacks to start a bridge then return for continuous weld. Could be in time you’d...

Since I have worked with Aluminium MIG in the past, I know for a fact that 1mm 5356 wire goes into a clean spray transfer at a true, calibrated 22-23...

You bozos are incorrect on all counts. The pictures clearly show thin material and I did mention that I was welding 1.5mm thick material. I think...