Activity Stream

How much weight do you think I will add with a good scissor and electric pump? The scissors I looked at were 300-500 lbs with a pump. What makes...

Where I get my steel they have a few of those. Amazing machines. I would like to see a tig master run one.

I didn't know if you saw my response regarding my pricing estimations and expectations. Do you think I'm in the ballpark or a little too proud of...

I have been buying Klingspor 60 grit by the box of ten since the late 80s. But I have a grinder with a hard whell on it, right next to the grinder...

Price wise I think they are a good value i don’t do a lot of finish work so grinding pipe saddles and paint $ for $ I think they are a good deal

Your selling way to cheap! At least double the price.

Just a few questions to help flesh this skeleton out... Pictures would help immensely too. What part(s) on the basket are breaking? The mesh? The...

Seems like you are shooting yourself in the foot by using the PS pump. A 12v hydraulic pump can be had for $100-$300, they provide the right...

Yep, those files were awesome!

Are you the same isaaccarlson I sent some saveedge files several years ago? You were posting on Arboristsite.

Been tempted to try those lehigh valley ceramic flap discs, but each time I use my 3M Cubitron 967A #56475 reminds me I don't need to be switching...

thats an interesting observation, the hand position on all these welds was difficult for me. I am really good and fast with Mig welding .... and i...

I guess I'd sell the foot control too if someone really wanted it with the machine. Not happy about selling it really - but sometimes lack of...

Yes it can :D

If possible connect trailer to another vehicle and test, and your truck to another trailer to test. Sent from my iPhone using Tapatalk

If anything like the basket I repaired and from normal use, then It is a design /function issue. Stainless eventually work hardens and fractures. ...

Say it isn't so, that's your baby! Might be worth including the foot pedal and upping the price. Saves the buyer having to try and find the correct...

I think he wants advice on pulse settings. In that pic, pulse is turned off, correct?

That can weld razor blades to battleships?

Straight argon would likely be better than anything with co2 in it for stainless.

Lis2323 You are kind of the reason I posted this, I had a great experience BS and getting some supplies and advice and I recalled as I drove home...

Either the grounds, poor connections for the power wire, or worn magnets.

It would be easier to train your cooks.

That is very very cool and you should be proud. Helping a kid.

Here are the basic settings for your Primeweld Tig225. The only thing you have to change is your welding current and AC/DC switch for most welding.

That will be his pride and joy showing it to others. But should have made it big enough for the kid to sit in. With pedals connected to a prop. ...

I welded up a 4 way for my log splitter and then a 4 and 6 way for another guy. 3/8" body with 1/2" wings. I used my hobart 140 and .030 flux core...

What I can tell you, is you don't typically use upslope/downslope when you are using a footpedal. If you ever try it, you'll know why. ...

I've used a few different fuel gases and regardless which one I'm using, I hit the cutting lever to check the flame. I want to adjust it so the inner...

Generally 316 is used for food service. I would think the baskets are resistance spot welded. You could see if there's a manufacturer of welded wire...

Some of the controlers have an minum angle they have to be at. If they get to close to vertical they won't work

Consider yourself fortunate. Sent from my iPhone using Tapatalk

It will take some work to cut out the center slot but go find some skirt/flashing rubber at an aggregate plant. They probably have some used stuff...

I use the Lehigh I think they are 40 grit but I get the xl { I think } they are the thick one and they are flat but I grind a lot of rusty pipe heavy...