Activity Stream

All telescopic cylinders single action? Just asking because I don't know.

VaughnT, is this the burner you run? https://www.ebay.com/c/1731733419

Sure, I had a 3rd shift supervisor at one gig whose name was Harry Beavers. I guess parents can be oblivious or cruel. Sent from my SM-G973U using...

His cousin is Mike Hunt.

It is probably not Apple any more than the PC world. But both companies go out of their way to comply with an agreed-upon standard only if the other...

I don't see how the Esab is more difficult to use than the Miller. The AC TIG side of things is fairly simple as far as TIG sets go. You have...

All of those machines he mentioned do it all, TIG, MiG, and ARC. Sincerely, William McCormick

Get a couple of electric strip heaters and lay the anvil on them, cover the anvil with an asbestos blanket and wait a couple of hours. It will go...

The bottom of the tank is not so bad if exactly controlled, but if you do that to the top of the tank with a torch you might not be so lucky. It...

Many years ago my brother was pumping out water contaminated diesel fuel from a boat some thirty feet away from the secured oxygen and acetylene...

Telescoping cylinders are a PITA to retract. I don't believe a little pickup body would provide enough weight to make it come down easily. Slight...

I just picked up a G-213 circa 1954 with the TJD-2 engine. Serial number AAW-72876. It appears to use the EEA100 starter. It turns over slow on 6V...

I should add that when we were having problems with the big dump trailer it would not work on any of the newer vehicles with the integrated...

Thanks. I have messed with air brakes before but not much with electric brakes.

Ok. In the morning I plan to run power from a battery to the brake pin on the trailer. I will also try the breakaway.

https://pubs.aws.org/p/1924/aws-fundamentals-of-welding-curriculum

@toran... do they handle any foodstuffs? I am curious because it's getting more and more difficult to find supplyhouses that carry SPAM would be very...

The forced-air or blown burners are more fuel efficient and get hotter faster. They are also a lot easier to make since they are quite literally...

You might want to stock up on red fuel for your new loader also.... as it will soon be getting more 'valuable' ;)

Sure, but the only cylinder failures I'm aware of were in a burning building or a delivery truck that wrecked. Like any flammable, if you treat it...

Oh come on Lis... that's got to be some very special shipping for that price!!! :D I'm sure it's worth it.!!!! Just got an order from benchmark...

Yep, that low amperage 12V is probably just for a circuit status check from the controller. Time to do some direct checks on the trailer circuits. I...

Well... start stockpiling your metal now. I had $2k worth in my pickup today and it was a little shocking. I was still buying old stock and avoiding...

Depending on controller.... 12 volt constant with a DMM is different than 12 volt constant with a test light... ;) you have to use an incandescent...

Just tested the plug on the truck side. Looking at a diagram, the pin at the 5 oclock position is the trailer brake pin. It has 12 volts constant! No...

Here's the tri legged stand I plan on copying but with two ten inch home made steel wheels with scrub brakes in the back, and a piece of 4" square...

It could be that the wires to the brakes are broken possibly, I will pull the wheels tomorrow.

Yes, I have a breakaway.