Activity Stream

Table rustlers?? I am just wondering how long before it suffers the same fate as the rotary table...so I can plan a trip north to pick it up.

jfk92, i use green/pure tungsten pretty much exclusively on AC, in aluminum on a Dynasty 300DX and it works great. My method is to use the 'next...

I too heard from an eye doctor that blue eyed folks have that problem, whether or not its true i coudnt say, i been weldin 45 years or so with a 9...

Just a little drain pan modification autogenous on 304 Sent from my iPhone using Tapatalk

Thank you. I have questions and will post on this thread or via PM. The gym sales where all by word of mouth and I did it for years. Too little...

I'm no expert at all. Just is spatter common with rebar and horseshoe due to the chemistry of those products?

Welcome to the forum. Sounds like you have a lot of experience to share.

Is that you, Bonzoo?

You hear the 15 psi warning a lot, but I've never heard of anyone blowing himself up by turning an acet regulator too high. Have you? Has anyone...

What gas are you using ? Definitely clean materials. Sent from my iPhone using Tapatalk

) popeye,,,frisbie farm equipment in upstate NY should get you deutz parts. try (607) 589 4492...ask for Russ. hey, IF you ever need to replace...

Relax Francis, you did not include those facts in your original post, only later when you posted up the photo of the bike. So yeah, people may have...

You truly are a piece of work. Maybe UV exposure cooked your brain, providing there was much there to start with. I'll give you some professional...

thanks Dave,

That sounds like it requires some experience to do.

5356 wire leaves a black soot due to magnesium content and spray transfer requires at least 25 volts and is only good for thick material. My welder...