Activity Stream

I sometimes heat the metal on purpose when I want to grind and blend, the beeswax works best when the part gets some heat in it. That is how I polish...

I hit my discs with beeswax when I put one on and every now and then while using it and they just keep cutting. Sincerely, William McCormick

I have been buying T-29 style flap discs from the same company for years. 60 grit high density is what I prefer to use on the projects I do. I use...

Related Welding Reviews & Buyer’s Guide: https://weldingzilla.com/best-tig-welders-under-1000-2021-top-picks-reviews/ SALARY OF...

https://www.shoppok.com/milwaukee/a,37,259531,RUBBER-COAX-SEAL-KIT----3--WEST-ALLIS-.htm check this. Not mine.

Here is a decent comparison video between the miller 220 and the ESAB AC/DC. One thing he does not mention is pulse options. The ESAB is capable of...

lol... a thin coat of candy apple red would look good on them...

Thank you for your reply Tom Sent from my SM-G960U1 using Tapatalk

I think your signature at the bottom about sums it up.

Not so sure it bridges. I have never gotten it to build up in air. A nice fillet isn't gonna reach up and grab a shortened wire. I agree...

Yes but my machine has a the r51 bellows idler And is wired a bit different there’s two wire that come out the casing and go to the bellows then to...

Just a little.... :D :laugh:

Well with all due respect you do have to be a little crazy to be in this business. Sincerely, William McCormick

On your label it is the middle set. the splc is in front of the code number. The splc is short for special. Some thing was done to this welder that...

I found this picture of mine. It was a 1980 Blackface. I had the custom tread plate hood made for it. Smooth welding machines Sent from my...

If you ever have to take off the spring-loaded mud flaps just make sure to bend them down and then put something that will not fall out behind the...

I went over this whole thing with a flap wheel a thirty-six grit from these guys. ...

Mask off and make the bill/head a bit darker with Ospho or some other chemical darkener, then clear coat the whole thing.

Sent from my iPad using Tapatalk