Activity Stream

replace all the toggle switches on the front panel if you can. Old switches cause problems.

Stick-man See post # 12606 for an answer . . . hth Opus

two things first the o-rings on the power pin are damaged. you can see pieces are missing. they must be replaced. Next measure with a small steal...

Red-d-arc welder rentals uses Kubota. I value their experience. That said, I'm not sure I would be afraid of a Perkins.

Did you make a thread on this project? Because I owned dump trucks for almost twenty years, I would really like to see all aspects of it including...

Look for the torch test. Then remove the cover. on the left side is the output pcb. There are LEDs on it. Find the page in the manual that will tell...

finished. 70 kg in mm. i think a different design would be smarter. Sent from my SM-G398FN using Tapatalk

Oooooooooooooooooooooo nice!!!!! :D Are you putting those up for grabs??? ;)

Yeah, Yeah, I know, it's an old thread, but I came across it, and maybe someone else will looking for information. This is an Acetylene...

Thanks, that is 1 of 4 British FV1611 Pigs I own, that one is a 1955 MK 2 that was used extensively in Northern Ireland and came to me with a blown...

Canadian? Sent from my iPhone using Tapatalk

might want to do some research to find out what alloy that plate is as it appears to be forged and may not be weldable...

Well.... they do have this fridge magnet for 50 cents.... :D https://store.spam.com/all-products/spam-classic-magnet

While they may look identical(almost) the knock-off version is more than likely using much cheaper components and maybe even different circuit...

Sorry that's more than I planned to spend. You've known him longer. You buy it. Sent from my iPhone using Tapatalk

This is really interesting. Both below machines are identical, except the branded one is twice the price.(one of the TIG AC/DC machines I posted...