Post a reply to the thread: Powcon 300sm wirefeeders pd10,20 etc.
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
A) Welding/Fabrication Shop B) Plant/Production Line C) Infrastructure/Construction/Repair or Maintenance/Field Work D) Distributor of Welding Supplies or Gases E) College/School/University F) Work Out of Home
A) Corporate Executive/Management B) Operations Management C) Engineering Management D) Educator/Student E) Retired F) Hobbyist
Will turn www.example.com into [URL]http://www.example.com[/URL].
Re: Powcon 300sm wirefeeders pd10,20 etc. Awesome, Thanks ever so much for that! finding documents for these welders is getting quite hard now. Originally Posted by ArcPowTech Not sure if you meant 550SMP or 630SMP, but here are links to both: 550SMP 630SMP
Re: Powcon 300sm wirefeeders pd10,20 etc.
Re: Powcon 300sm wirefeeders pd10,20 etc. Not sure if you meant 550SMP or 630SMP, but here are links to both: 550SMP 630SMP
Re: Powcon 300sm wirefeeders pd10,20 etc. Hi, i’ve noticed that you seem to have a few manuals for Powcon, you don’t happen to have one for a 530smp do you? I have a one that’s a bit wonky and need to find the fault so i can fix it and sell it on. Thanks
Re: Powcon 300sm wirefeeders pd10,20 etc. Arcon's site is down because Arcon has been sold (partly). They branched into welding training, and then metal fabrication training, and now safety training. The manufacturing operation has been sold to Mirabel Industrial Welding Equipment. Mirabel's site isn't up quite yet, but here is a link to the PD20 manual (I don't have one for the PD10): https://www.dropbox.com/s/4v7ejsy21s...anual.pdf?dl=0
Re: Powcon 300sm wirefeeders pd10,20 etc. It seems that the Arcon site still does not work!
Re: Powcon 300sm wirefeeders pd10,20 etc. Looks like it has crashed, should be up in a few days. Send me a PM if it doesn't
Re: Powcon 300sm wirefeeders pd10,20 etc. Ok great. Thank you, that info is a big help. But website not wrkn.
Re: Powcon 300sm wirefeeders pd10,20 etc. Most of the manuals are on the ARCON web site, The power drive 10 should work if it has the right plug on the cord. If not it can be changed. The powcons work backwards. a closed circuit in the feeder turns the welder output off. open and it has output. You will know because the ticking stops.
Powcon 300sm wirefeeders pd10,20 etc. Hey guys i need to know if the pd 10,20 and 30 can work or be adapted to work With the 300sm. I have a lead on a cheap pd10. Also any manuals for those feeders would be great.
Powcon 300sm wirefeeders pd10,20 etc.
Forum Rules