Reply to Thread

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

Sounds good. Just call the guys over at ext 207 at 977 755 9353 and they can help you and get you another one if necessary.

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

It is on pedal the same setting I use with the wired pedal

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

Which is it on then? Need all the info you can give me.

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

It is on the same setting that I use the standard pedal on. There wasn't any paperwork in the packaging I assumed you used it on the same settings.

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

What do you have your machine set to on the panel? Is it 2T, pedal, 4T, 2T+Pedal, or 4T +Pedal?

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

SO I finally got my pedal and tried it out for the first time tonight it will not vary the amperage just acts the same as a thumb button. Has anybody had a problem with there's? It was to late to call so I thought I would try here going to call in the AM I am using it on a 350EXT

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

The production models are scheduled to be available soon. BTW, the units are rechargeable and under our heavy testing last past 40 days between charges on a full 8 hour shift of constant 100% duty cycle use. Compared to similar models we tested, this is more than twice the life span. Expected recharge cycle life is 300 cycles before the batteries begin to decline. The unit also has an off switch to extend battery life when not in use.

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

Early April we hope. They are in production this month sometime.

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

It's been a while... any update on this?

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

It should.

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

I have a 256 D....will the wireless pedal work?

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

We'll let you know. Covid has made things unpredictable. Should be soon though.

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

Originally Posted by lugweld

Just ending the final phase of testing for distance/ interference etc. All tested concerns seem to be clear. Final preproduction samples are being made now. Hopefully we will have stock by end of year.

Is there going to be a pre-order opening anytime soon? Don't want to miss out lol.

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

No, lol. We got plenty of those standing in line.

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

are y'all lookin for testers?

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

Just ending the final phase of testing for distance/ interference etc. All tested concerns seem to be clear. Final preproduction samples are being made now. Hopefully we will have stock by end of year.

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

Got an ETA on these?

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

Still in final revision. Not yet used one.

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

Mark, have you used one yet? I might be interested in one if I can get hold of some reviews.

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

I think it would be easy to tap off the power switch or from the cooler and mount another outlet on the back of the welder. There is no correct way to get 110 volt with out a neutral on 240 single phase. That's probably why the coolers are 220 also.

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

Right now these are for digitally controlled units. Will have to check on the future ones for non digitally controlled units.. The progammability issue is being resolved I think. I'll have to check. It will require a frequency switch, I am sure.

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

Is Everlast going to be selling that pedal for all the listed welders? What about the AHP, Lotos, Eastwood, Primeweld, Razorweld, etc. ? Are they going to be programable so if you have 2 or 3 welders in the shop they will not interfere with each other?

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

120 for the dongle, and battery for the pedal. I am not 100% sure how the power would matter on this one. The rear connection would be eaten up (on our units) by the watercooler. How would you supply a low amp 240V voltage plug?

Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

What kind of power does it use? I would want to change it over to 220 that way you won't need another cord to drag around with the welder.

New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

The new NOVA wire pedal has just been announced. Delivery should be in September sometime. It could be sooner, but we don't want to press the final stage.

Price is going to list around 299.00

Let us know if we can save you one.