Post a reply to the thread: Tig hose broke
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
A) Welding/Fabrication Shop B) Plant/Production Line C) Infrastructure/Construction/Repair or Maintenance/Field Work D) Distributor of Welding Supplies or Gases E) College/School/University F) Work Out of Home
A) Corporate Executive/Management B) Operations Management C) Engineering Management D) Educator/Student E) Retired F) Hobbyist
Will turn www.example.com into [URL]http://www.example.com[/URL].
Re: Tig hose broke Fixed, $13Attachment 1732590
Re: Tig hose broke
Re: Tig hose broke Connection at head
Re: Tig hose broke The hose is falling apart, needs to be replaced. Saw some on amazon. Are compression fittings universal? I was told this tig machine is italian, not chinese and decent.Attachment 1732333Attachment 1732334
Re: Tig hose broke Just trim off the end and reinstall with the compression sleeve.
Re: Tig hose broke YOu also may want to check the regulator to be sure the pressure is not creeping up higher then is should be.
Re: Tig hose broke Typical shielding gas pressures are around 50psi, so not that high pressure. Braid-reinforced vinyl hose (thick wall) of the same size will suffice.
Tig hose broke My mini chinese tig gas hose cracked.its the hose to the torch. The fitting is a compression type so i assume the pressure is high. Can this be repaired?
Tig hose broke
Forum Rules
