Reply to Thread

Re: 502 Bad Gateway

Page 2 on sammm's fuel pump is still giving a 502 bad gateway @ 8:58 PM CST, April 22.

Re: 502 Bad Gateway

now??

Re: 502 Bad Gateway

page 2 of Sam's fuel pump thread has been messing up for a day or 2.... I'm not the only one.... https://weldingweb.com/vbb/threads/7...p-Thread/page3

Re: 502 Bad Gateway

try now?

Re: 502 Bad Gateway

https://weldingweb.com/vbb/threads/7...Etch-don-t-lie!

This one is doing it now

Re: 502 Bad Gateway

try now

Re: 502 Bad Gateway

https://weldingweb.com/vbb/threads/7...feedback-bench

Re: 502 Bad Gateway

Originally Posted by Popeye an old miner

This Bad Gateway thing comes up on some of these post the past couple days, one of em is the one I had on the project forum titled Some stuff in our shop.

Evidently if you get the bad gateway problem you are on your own. Fortunately, I think I have found a workaround--at least it solved my problem where if I tried to go the the last page of the thread the gateway thing showed up.

Try going "Forum Actions/General Settings/Number of posts to show per page" and set the number of posts per page from forum default (or whatever it's set to now) to something different. Oddly, once you have done this and tried it out, if it works it still seems to work even if you go back and set the number of posts per page to what it was in the first place.

Tim

Re: 502 Bad Gateway

Getting 502 Bad Gateway on the last page of the BBQ/Good Food thread.

https://weldingweb.com/vbb/threads/6...-Thread/page71

Everything else, including other pages in that thread seem to work fine.

Tim

Re: 502 Bad Gateway

This Bad Gateway thing comes up on some of these post the past couple days, one of em is the one I had on the project forum titled Some stuff in our shop. Is there somethin wrong that the post got deleted cancelled or blocked or is it my computer, which could be because its an old laptop. Just wondering

Re: 502 Bad Gateway

502 error here - previous pages work but latest does not
https://weldingweb.com/vbb/showthrea...Vaccine/page17

Re: 502 Bad Gateway

Originally Posted by Robb M.

how about now?

I just have a general question..some threads have pages that have a ton of posts, then other threads the pages are short before going to the next page..just wondering why that is????

Re: 502 Bad Gateway

Originally Posted by ronsii

I'm seeing a lot of tapatalk errors and other anomaly's to do with the tapatalk stuff... might just be a coincidence.. or not...

its been censored.................

Re: 502 Bad Gateway

Originally Posted by ronsii

yes... but right click on it and 'view source'

I'm seeing a lot of tapatalk errors and other anomaly's to do with the tapatalk stuff... might just be a coincidence.. or not...

Re: 502 Bad Gateway

Originally Posted by Hobbytime

all I get on page 930 is a white screen..nothing but a blank page...

yes... but right click on it and 'view source'

Re: 502 Bad Gateway

Originally Posted by ronsii

The page is there... you can view the source and media... kinda weird but the 930 page has Zap's initial post??? mixed in... like it's an out of frame thing going on?????

all I get on page 930 is a white screen..nothing but a blank page...

Re: 502 Bad Gateway

Originally Posted by Hobbytime

dead page, page is just blank..heres the link..

https://weldingweb.com/vbb/showthrea...d-2020/page930

The page is there... you can view the source and media... kinda weird but the 930 page has Zap's initial post??? mixed in... like it's an out of frame thing going on?????

Re: 502 Bad Gateway

Originally Posted by Hobbytime

dead page, page is just blank..heres the link..

https://weldingweb.com/vbb/showthrea...d-2020/page930

Yup, just dead blue page. and we have several 502's on other threads.

Re: 502 Bad Gateway

dead page, page is just blank..heres the link..

https://weldingweb.com/vbb/showthrea...d-2020/page930

Re: 502 Bad Gateway

That was fast.... yep, seems good. Thanks.

Re: 502 Bad Gateway

how about now?

Re: 502 Bad Gateway

Under the "stickies" forum... blacksmithing and forging has been out to lunch since last night. https://weldingweb.com/vbb/showthrea...forging/page61

Re: 502 Bad Gateway

I get a bad gateway error on the last page of this thread

https://weldingweb.com/vbb/showthrea...45#post8795945

Re: 502 Bad Gateway

Originally Posted by John T

Stalking?
That’s a stretch.

But if that’s your perception I guess we can also accuse you of stalking opus.

Go back to your political thread hole where you and the others can freely insult each other.

That kind of activity will not be put up with here.
Consider this your last warning.

LOL..john a legend in his own mind....

Re: 502 Bad Gateway

Stalking?
That’s a stretch.

But if that’s your perception I guess we can also accuse you of stalking opus.

Go back to your political thread hole where you and the others can freely insult each other.

That kind of activity will not be put up with here.
Consider this your last warning.