Post a reply to the thread: Vulcan Omni Pro 220
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
A) Welding/Fabrication Shop B) Plant/Production Line C) Infrastructure/Construction/Repair or Maintenance/Field Work D) Distributor of Welding Supplies or Gases E) College/School/University F) Work Out of Home
A) Corporate Executive/Management B) Operations Management C) Engineering Management D) Educator/Student E) Retired F) Hobbyist
Will turn www.example.com into [URL]http://www.example.com[/URL].
Re: Vulcan Omni Pro 220 My Miller Multimatic 255 has settings for 24 gauge, 20 gauge, 18 gauge, 14 gauge, 1/8, 3/16, 1/4, 3/8, and 1/2 Its up to you to dial in the right settings for "in between" metal thicknesses. I am not surprised that the Omnipro is the same way.
Re: Vulcan Omni Pro 220
Re: Vulcan Omni Pro 220 I can turn my 180 up more , squeeze a couple more A out of it but the arc turns to crap. On the top end no matter what that chart says, there aint no mo.
Re: Vulcan Omni Pro 220 You need 3 settings. Thin, medium and thick and mark your chart. That little machine could be on thick or where its wide open a good share of the time. There aint any good way to describe in a chart what the welder learns from experience and training. Just cause its set to weld thicker doesnt mean a guy cant weld thinner faster so a 030 compact I am wide open much past 16 ga and for sure at 10 unless we got a big ole hairy crack in it. I tend to find myself turning it down a little more than I used to on thinner and am going to get a 140 onme of these days for small wire.
Re: Vulcan Omni Pro 220 Does it do this with every wire size?
Re: Vulcan Omni Pro 220 There’s presets, 3/16, 1/4, 5/16 etc. mine jumps from 1/4 to 3/8 Sent from my iPhone using Tapatalk
Re: Vulcan Omni Pro 220 What do you mean ? "skip some metal thicknesses"
Vulcan Omni Pro 220 Does any ones welder skip some metal thicknesses when setting up for mig? Mine skips over 5/16 and some thinner gauges. Happens on all wire size settings.
Vulcan Omni Pro 220
Forum Rules
