Reply to Thread

Re: Miller syncrowave 351- Pulser

I have a couple older weldcraft and they been holding up, the ck torches are nice but not as durable as the tec/speedway torches, don't think any of the above would be a disappointment, and they all change their stuff so what you buy today may not be the same next year, buy good consumables the collets/collet body 10 for 20 bucks are crap in my opinion , the ck torches from htp are usually a good price with a nice lightweight leather cover and good service, I welded above 225 amp on ac a majority of the time although not pushing duty cycles, aluminum castings

Re: Miller syncrowave 351- Pulser

That's the torch I use on my Syncrowave 250DX, it's a great torch. Purchased it about 2 years ago from HTP.

Originally Posted by xryan

No, NOT the "flex head" those do wear out (eventually) then snap. Get the "FlexLoc" the head is rotatable 360 and lockable in any position. Way better than flex head. Also, spring for the superflex cables, it's worth it over the standard pvc cables much nicer to use and way more durable too. You'll love it.


Sent from my LM-Q710.FG using Tapatalk

Re: Miller syncrowave 351- Pulser

Originally Posted by jgozani

Well that's what I hear, the flex head is the way to go for sure,

No, NOT the "flex head" those do wear out (eventually) then snap. Get the "FlexLoc" the head is rotatable 360 and lockable in any position. Way better than flex head. Also, spring for the superflex cables, it's worth it over the standard pvc cables much nicer to use and way more durable too. You'll love it.


Sent from my LM-Q710.FG using Tapatalk

Re: Miller syncrowave 351- Pulser

Originally Posted by xryan

Yes. CK, specifically flex lock torches. Nothing better.

Sent from my LM-Q710.FG using Tapatalk

Well that's what I hear, the flex head is the way to go for sure, saw these torches go for aroung 180$ on amazon that's seems like a great deal.

Thanks for the help

Re: Miller syncrowave 351- Pulser

Originally Posted by jgozani

Will look it out for sure, is this company better then weldcraft? Not planning on welding above 300 but who knows

Yes. CK, specifically flex lock torches. Nothing better.

Sent from my LM-Q710.FG using Tapatalk

Re: Miller syncrowave 351- Pulser

Originally Posted by jgozani

Will look it out for sure, is this company better then weldcraft? Not planning on welding above 300 but who knows

I don't know, better is a relevant term. Not trying to be evasive just haven't used their product.

Re: Miller syncrowave 351- Pulser

Originally Posted by ccawgc

Both pc300 and 042646 are obsolete from miller. PC7 139 398 the pulser pcboard is also obsolete from Miller.
Contact every welder repair shop you can find close by. Tell them what you are looking for. They might put you in touch with another welder owner that just died and is not repairable. You can work out a deal on the parts.
Also find out who is your Miller rep for your area. They might know where a welder is setting and not being used.
Same thing with the outside salesmen at your local welding supply stores. Make friends and you might get lucky.

Really appreciate your comment. I am trying hard called all the guys that I know and don't still waiting on reply from some, But thought I would check out here too,
Might get lucky who knows.
Is- PC7 139 398 the part number for the whole board?

Thanks again!

Re: Miller syncrowave 351- Pulser

Originally Posted by LtBadd

Well do you need to TIG weld above 300 amps? If so then that will determine which torch to buy, I'd go with CK but there are others
such as TEC Welding

As for the P300, maybe start a post on the Miller forum as well.

Will look it out for sure, is this company better then weldcraft? Not planning on welding above 300 but who knows

Re: Miller syncrowave 351- Pulser

Both pc300 and 042646 are obsolete from miller. PC7 139 398 the pulser pcboard is also obsolete from Miller.
Contact every welder repair shop you can find close by. Tell them what you are looking for. They might put you in touch with another welder owner that just died and is not repairable. You can work out a deal on the parts.
Also find out who is your Miller rep for your area. They might know where a welder is setting and not being used.
Same thing with the outside salesmen at your local welding supply stores. Make friends and you might get lucky.

Re: Miller syncrowave 351- Pulser

Well do you need to TIG weld above 300 amps? If so then that will determine which torch to buy, I'd go with CK but there are others
such as TEC Welding

As for the P300, maybe start a post on the Miller forum as well.

Miller syncrowave 351- Pulser

Hi,

New here and just bought my first real welding machine it's a 1996 Miller Syncrowave 351 and it did not came with a factory mounted pulser.

Well I know there is a p300 by miller but trying my luck on getting the original machine pulser.

I have the part # for it -042646.

Any chance that I can find this? or am I just dreaming?

Also I wanted to get a recommendation on a good water cooled torch to get me started, I am not new to welding just to the tig world which is a bit more complicated to me.

Welcoming your comments and help!

Thanks !