Reply to Thread

Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

Originally Posted by cornchip

infact its never even been used outside

....the country.

sorry cornchip. couldn't help myself. lol

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

Originally Posted by Lis2323

too late to edit my spelling error.

"Soeedglass" logo......the true give away that it's a knockoff. LOL

Whadaya call a knock off Speedglas? A Speedless.

Sent from my Lincoln Buzzbox using Tapatalk

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

not a single thing wrong with it. infact its never even been used outside lol

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

Originally Posted by Lis2323

it says "Optrel" on it.

for an additional $50 cornchip will paint it over and draw a Soeedglass logo on with a permanent marker. [emoji23]

too late to edit my spelling error.

"Soeedglass" logo......the true give away that it's a knockoff. LOL

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

Originally Posted by Wamsutta

That sounds tempting. What's wrong with it?

it says "Optrel" on it.

for an additional $50 cornchip will paint it over and draw a Soeedglass logo on with a permanent marker. [emoji23]

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

Originally Posted by cornchip

e684. its a bit different than the one your asking about but you can try it if you want

That sounds tempting. What's wrong with it?

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

e684. its a bit different than the one your asking about but you can try it if you want

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

Originally Posted by cornchip

ill send you mine just pay shipping. if you like it give me $50 if not just send it back

Which Optrel model do you have?

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

ill send you mine just pay shipping. if you like it give me $50 if not just send it back

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

Originally Posted by Lis2323

try a couple on for comfort and buy the best one you can afford.

I wish I could. None of the welding stores around here have them.

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

Originally Posted by Wamsutta

But in the darkened state, the view in the Quattro and the CLT will look the same; correct?

try a couple on for comfort and buy the best one you can afford.

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

Originally Posted by Wamsutta

But in the darkened state, the view in the Quattro and the CLT will look the same; correct?

I can only guess so, I don't have a Quattro.

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

dude all the filters in any modern name brand helmets are good ,as far as how well you can see. the differences are in the head gear design. pivoting design. button location for the adf etc

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

Originally Posted by Oscar

Yup, you can find all the info on the Optrel website. undarkened state is shade-3, and goes up to 13.

But in the darkened state, the view in the Quattro and the CLT will look the same; correct?

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

Originally Posted by Wamsutta

Supposedly, the Quattro doesn't have the 2.0 lens that the Panoramaxx CLT does. But the Quattro goes up to shade 13. The CLT maxes out at 12.

Source for info is Baker's Gas.

Yup, you can find all the info on the Optrel website. undarkened state is shade-3, and goes up to 13.

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

Originally Posted by KWilliams40

It's better than any other hood I've used. Can't tell you about durability yet(SpeedGlas currently wins in this department).

Supposedly, the Quattro doesn't have the 2.0 lens that the Panoramaxx CLT does. But the Quattro goes up to shade 13. The CLT maxes out at 12.

Source for info is Baker's Gas.

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

What about the nose cutout? Some guys say the nose cutout will slam down on their nose when they're flipping the helmet down.

Does the nose cutout provide enough room for the nose bridge of safety glasses?

What about the nose cutout pad? The nose cutout pad is not mentioned in the video. How does the pad attach to the helmet?

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

Originally Posted by michaelbosman342

I used this model of hobart.

Thank you so much!

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

Comparing a $300 helmet to a $700 helmet... 12 yr old technology to the latest.... not hard to see who will win.

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

Originally Posted by DannyPhilips

Which Hobart model did you use?

I used this model of hobart.

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

Hobart

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

Which Hobart model did you use?

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

This welding hood is best I used its after Hobart , hobart has low quality as compare to optrel panoramaxx CLT 2.0 I will recommended to welders

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

Originally Posted by KWilliams40

It's better than any other hood I've used. Can't tell you about durability yet(SpeedGlas currently wins in this department).

So, I think it's a really worthwhile model. As for durability, time will tell, I think the mask will serve its time.

Re: Optrel Panoramaxx CLT 2.0 welding helmet, with Isofit headgear

Originally Posted by DannyPhilips

Perhaps these two words are more eloquent than the big review

It's better than any other hood I've used. Can't tell you about durability yet(SpeedGlas currently wins in this department).