Results 1 to 5 of 5

Thread: Lincoln Ranger 8+ Remote Recptacle K892-1

  1. #1
    Join Date
    Jul 2009
    Posts
    3
    Post Thanks / Like

    Lincoln Ranger 8+ Remote Recptacle K892-1

    Hey Guys, I am new to the forum. I recently bought a lincoln ranger 8+ diesel powered welder. The thing runs and works awsome but I really need to set it up for MIG and TIG as well. I need part # K892-1 Remote Receptacle Kit. I have spoken to Lincoln several times and they have been no help, the part is discontinued. I have tried every other welding supplier I can find on the web. My last hope is Stumph whom I havent heard back from . Any other ideas would be appreciated. Thanks!

  2. #2
    Join Date
    Mar 2007
    Location
    MidWest
    Posts
    526
    Post Thanks / Like

    Re: Lincoln Ranger 8+ Remote Recptacle K892-1

    The boys at Stumph are very busy, but stick with them. They travel allot. Who there are you working with

  3. #3
    Join Date
    Jul 2009
    Posts
    3
    Post Thanks / Like

    Re: Lincoln Ranger 8+ Remote Recptacle K892-1

    I actually havent heard from Stumph yet so I dont have a point of contact yet. I also havent had any more luck in my searches elsewhere. Looking at adapting a different kit to work with my welder. Anyone done something like this?

  4. #4
    Join Date
    Jul 2009
    Posts
    3
    Post Thanks / Like

    Re: Lincoln Ranger 8+ Remote Recptacle K892-1

    Thanks for the tip I will call and talk to Kaye as soon as I can. AC aluminum is essential for the type of work I do. I work around the water so every other thing that has to be welded is stainless or aluminum and I am tired of having to remove stuff and cart it back to the shop. Already have the HF converter on my shop welder though I way get a new one rather than switching that one. If I can get the remote I will start browsing my options for the set-up.

  5. #5
    Join Date
    Oct 2006
    Location
    Ca, USA
    Posts
    5,211
    Post Thanks / Like

    Re: Lincoln Ranger 8+ Remote Recptacle K892-1

    For your tig, just get a seperate inverter tig welder and run it off the generator. Simpler, easier and much better tig welder too.
    MM350P/Python/Q300
    MM175/Q300
    DialarcHF

    HTP MIG200
    PowCon300SM

    Hypertherm380
    ThermalArc185
    Purox oa
    F350CrewCab4x4
    LoadNGo utilitybed
    Bobcat250
    XMT304/Optima/Spoolmatic
    Suitcase12RC/Q300
    Suitcase8RC/Q400
    Passport/Q300

    Smith op

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,606,331,937.00912 seconds with 13 queries