Results 1 to 3 of 3

Thread: Classic 300D charging issue

  1. #1
    Join Date
    May 2014
    Posts
    3
    Post Thanks / Like

    Classic 300D charging issue

    Hey guys, My names JT I'm 31, I've been welding for 10 years. Graduated from MWI in 2004, and since then I've been all over the country, doing all different types of welding. For the past couple years I've been working the gas fields fields of PA (6010/8010), and fabbing equip. for the rigs. I'm hoping maybe someone can help me out, before I run my machine down to Scranton and get shafted by the repair shop. I installed a remote in my Lincoln Classic 300D and after using it for an hour or so the machine shut off, I looked inside and noticed that one of the two hour meter wires had touched the other, so I remedied the issue and it started and ran fine. It wasn't until a week or so when the battery went dead that I realized there was a problem,..it won't charge. I replaced the batt and the alt, and the power still wont circulate, and the hour meter isn't ticking over either. I'm hoping it could be a simple fuse, but I checked everything I could and found nothing, I'm assuming at this point, its the PC board. Oh and btw, I did check to see if the meter was shot, and that wasn't the issue. THANKS!

  2. #2
    Join Date
    Feb 2009
    Location
    Lafayette, Louisiana
    Posts
    1,191
    Post Thanks / Like

    Re: Classic 300D charging issue

    I don't know if you have this or not, but here is a link to get the users manual from Lincoln. You will need your code number for the correct manual.

    http://www.lincolnelectric.com/en-us...300D&type=text
    Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.
    -Cree Indian Proverb

    SA 200 Lincoln
    Victor Torches

  3. #3
    Join Date
    May 2014
    Posts
    3
    Post Thanks / Like

    Re: Classic 300D charging issue

    Thanks!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,606,604,551.65069 seconds with 13 queries