Page 115 of 115 FirstFirst ... 1565105113114115
Results 2,851 to 2,872 of 2872

Thread: AHP Owners/Users Thread. No Trolling unless you have used/own one!

  1. #2851
    Join Date
    Dec 2019
    Location
    Four Corners, CO
    Posts
    17
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    Quote Originally Posted by TexasT View Post
    I bought it because I've wanted a tig machine for years and really never could afford one. This one had enough good reviews for me to take a chance. I'm super happy with it so far.

    Oh, NICE cart you built! i am jelly. I work full time so I don't really get to do what I want all the time. But I do sneak out to the garage every chance I get to fool with my projects.
    Thanks! Exactly the same reason I bought mine.

    My practice has been limited. As I run a pass, I get random popping. Upped the gas, as one youtuber said his meter reads high for the actual flow and looks to be the same off brand as mine. Seems to be better. I hope I don't have bad gas. My first tig and it's hard to discern whether it me or equipment.
    Last edited by h82crash; 01-02-2020 at 02:31 PM.

  2. #2852
    Join Date
    Mar 2009
    Location
    Northern Virginia
    Posts
    297
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    Quote Originally Posted by dew343 View Post
    I have searched high and low for this info i guess i am going to have to reach out to AHP .40 amps is more than enough I am sure , but wou;d like to know what they recommend
    I was thinking about adding a 220v dedicated line to my shop and called AHP and they said for. 220, a 40amp was nominal...

  3. #2853
    Join Date
    Mar 2009
    Location
    Northern Virginia
    Posts
    297
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    Quote Originally Posted by ljdm View Post
    Just so you know, no, I am not affiliated in any way, nor paid, etc, by AHP to post what I did, I am just giving my experiences with AHP Tech support.
    i am as green as can be. I got my ahp 201xd in august and had a few questions for them. I called and wrote them and they answered and wrote me right back as well.

  4. #2854
    Join Date
    Mar 2009
    Location
    Northern Virginia
    Posts
    297
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    Quote Originally Posted by ljdm View Post
    Words of encouragement? Here ya go - Likewise, I'm on a fixed income, so I try to get the most for my dollars! I have the Alphatig200, the 201 is pretty much the same machine. I am very satisfied with it. Yes, their website is not quite up to par(it sux), even their Forum was never setup, along with registrations, etc. BUT....I have had great success with their Tech support. That being said, there are my words of encouragement. No, I am not affiliated with, or compensated by AHP.
    i might be the only person on their forum.

  5. #2855
    Join Date
    Mar 2009
    Location
    Northern Virginia
    Posts
    297
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    I read the entire 2019 posts for this section for AHP.

    Tonight i popped my cherry on my AHP201xd. It was a sobering experience.

    After reading and watching endless hours of videos on TIG, suited up, I carefully set everything up, cleaned a steel coupon and fired up my machine.

    I forgot to turn my helmet on, but I think it has an automatic moron proof sensor that saves people from flashing themselves and doing serious damage. Next it seemed like I was MIG welding, blasting holes in the coupon, crap flying everywhere. Something wasn't right....yup, i also forgot to turn the gas back on. Then, i just wanted to practice laying some beads...what a joke.....sad joke.....

    i thought i had all the settings right, but it was barely marring the surface of the coupon and after i released the foot pedal, the arc would continue and that was freaking me out. You old timers probably guessed what i did wrong.... anyway, frustrated to the max, i took a foto of my first attempt and took a picture of the settings to post here to get help...as i was writing the post I looked at the settings and realized what I did...it was on 4T instead of 2T. Still pretty sad attempt but tomorrow will be better.

    Name:  BDA13ADB-256E-4248-9C1A-066C2F0F6615.jpeg
Views: 349
Size:  99.1 KB
    Top left- no gas top right set on 4t instead of 2t with a pedal, bottom-filler wire attempt..... what a mess. Zero for zero.


    Name:  41A02C45-7C56-42F1-A0D4-8186189E9448.jpeg
Views: 347
Size:  96.1 KB

    There is nothing easy about first time TIG without the understanding of what settings to use..... i will be proficient in about 3 years.
    Last edited by vdotmatrix; 01-07-2020 at 02:07 AM.

  6. #2856
    Join Date
    Jun 2016
    Posts
    523
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    looks like you got it set a little low. other is the 3 p's. practice, practice, practice!
    lincoln 125sp
    monkey wards 250 ac/dc
    miller 211 w/spool gun
    ahp 200 sx tig
    lotos ltp5000d
    of course duramax diesel

  7. #2857
    Join Date
    Mar 2009
    Location
    Northern Virginia
    Posts
    297
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    Quote Originally Posted by duramax-rob View Post
    looks like you got it set a little low. other is the 3 p's. practice, practice, practice!
    Thank you. Should I start a new thread?

    Settings:

    I am using a 1/8 steel coupon and and my main amperage to around 130.
    DC and 4T for pedal.
    Starting (upslope) and ending(downslope) amps??

    PULSE: defines the characteristic of the pulse?
    Toggle switch for high and low frequency or NONE ?
    Pulse frequency: adjusts the shape of the cone?
    Pulse amperage: ?
    Pulse time ON?

    AC pulse and Freq. are for Al & Mg

    Post flow: gas duration after weld arc is broken to shield the cooling weld puddle.

    I want to watch the amperage as I hit the pedal to see that the amperage hits the max amp I dial in...i thought I saw a .002 that I saw from an earlier post.

    I need to understand and read about how to adjust the PULSE with the (3) dials or just leave them on min.

    Lastly, should i grind down the coupon or will that contaminate my flap sanding discs?

    Thank you all!

  8. #2858
    Join Date
    Mar 2009
    Location
    Northern Virginia
    Posts
    297
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    Name:  326928CA-BEC2-4605-908A-752DE362B717.jpg
Views: 340
Size:  136.3 KB
    My first beads. The first two coupons i used about 130a, 2t, no pulse, 3 sec post.
    The last coupon was my first beads adding filler wire.
    Man that stuff gets hot. I bought a tig finger and I am using it.

  9. #2859
    Join Date
    Mar 2010
    Location
    Delaware
    Posts
    2,907
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    4t is for the trigger not the foot pedal. More post flow 7sec. The brown is contamination form dipping the tungsten, resharpen it. Keep at it. Also in the picture your pulse is turned on not off.
    www.georgesplasmacuttershop.com
    Plasma Cutter and Welder Sales and Repairs--Ebay store
    Tec.Mo. Dealer Consumables for the PT and IPT torch's

  10. #2860
    Join Date
    Mar 2009
    Location
    Northern Virginia
    Posts
    297
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    Quote Originally Posted by mechanic416 View Post
    4t is for the trigger not the foot pedal. More post flow 7sec. The brown is contamination form dipping the tungsten, resharpen it. Keep at it. Also in the picture your pulse is turned on not off.
    I ran one bead at 1 sec low freq pulse but everything else the pulse is turned off because i was just practicing laying my first beads. Hmmm, now I am second guessing and dont now remember, but if you see that I had the pulse on, then I probably did....what do I know at this point..... I had to sharpen the entire pack of tungsten. The arc wouldn't appear on 4t and the pedal, which explained my bumpy start on this journey yesterday.

    With the pulse turned off, do i have to dial in the starting and ending amps or is that only for upslope and down slope? Thanks
    Last edited by vdotmatrix; 01-08-2020 at 12:33 AM.

  11. #2861
    Join Date
    Mar 2010
    Location
    Delaware
    Posts
    2,907
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    starting and ending amps and upslope and down slope are used in 4T with the trigger only. Never with the pedal turn them off in 2T.
    www.georgesplasmacuttershop.com
    Plasma Cutter and Welder Sales and Repairs--Ebay store
    Tec.Mo. Dealer Consumables for the PT and IPT torch's

  12. #2862
    Join Date
    Aug 2016
    Posts
    134
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    My settings for 1/8 steel...

    Name:  ahp settings.JPG
Views: 342
Size:  155.5 KB








    Charl

  13. #2863
    Join Date
    Mar 2009
    Location
    Northern Virginia
    Posts
    297
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    Quote Originally Posted by mechanic416 View Post
    starting and ending amps and upslope and down slope are used in 4T with the trigger only. Never with the pedal turn them off in 2T.
    Yes , i found that out early on... post #2855 shows what happens when i started first ever, with the machine set wrong. Thanks.

  14. #2864
    Join Date
    Mar 2009
    Location
    Northern Virginia
    Posts
    297
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    Quote Originally Posted by xmmancharl View Post
    My settings for 1/8 steel...

    Name:  ahp settings.JPG
Views: 342
Size:  155.5 KB

    Charl
    Thanks for posting this.

    You are, I assume @110v.

    So for working on mild steel, with NO PULSE, NO up or down slope, The only (2) knobs that we use is MAIN AMPS and POST FLOW- right?

    The other thing I noticed today, and also noting in your settings for 1/8" steel that, ON MY MACHINE, at 110v my amperage readings are as follows:

    AMP SETTING Reading

    10 ----- 8

    50 ----- 31

    100 ----- 88

    150 ----- 129

    200 ----- 148


    Is this accurate or sound right to you all?

    HERE are my latest TIG results on another post:
    https://weldingweb.com/vbb/showthread.ph...17#post8735317
    Last edited by vdotmatrix; 01-08-2020 at 08:33 PM.

  15. #2865
    Join Date
    Mar 2009
    Location
    Northern Virginia
    Posts
    297
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    Name:  4D452C51-DBB6-4FC1-B6ED-4F0126F4B659.jpeg
Views: 315
Size:  113.8 KB

    After laying out beads no filler, i started today with filler wire.

    Referring back to my last post i realized that if i am running my machine on 110v, i must crank the main amps high enough or a sufficient weld puddle wont appear to dab filler , as a beginner...

  16. #2866
    Join Date
    Mar 2009
    Location
    Northern Virginia
    Posts
    297
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    #post8735317[/url][/QUOTE]
    Last edited by vdotmatrix; 01-10-2020 at 11:38 AM.

  17. #2867
    Join Date
    Aug 2016
    Posts
    134
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    use 220 ac on all my welders...



    Charl

  18. #2868
    Join Date
    Mar 2009
    Location
    Northern Virginia
    Posts
    297
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    Quote Originally Posted by xmmancharl View Post
    use 220 ac on all my welders...



    Charl
    Hi charl,
    Thanks for responding to my newbie comments and questions. I was commenting based on the settings image you posted and i didnt check to see if we are using the same welder. Based on your main amp settings in your image, even if on 220ac, it would still be less than 100a. I read for 1/8” mild steel, the main amps shoukd be at least 120. I am using 3/32” tungsten. Thanks in advance.

  19. #2869
    Join Date
    May 2015
    Posts
    1
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    Got a new 201xd (April 2020) just got around to using it for the first time. The foot pedal on 2T the arc continues after taking my foot off the pedal. Post flow works as it should. Same problem using trigger control 4T. Plugged into 110v outlet. The arc only stops after I pull away from the material. Anyone know what’s going on here? Do I have a bad board?

  20. #2870
    Join Date
    Mar 2010
    Location
    Delaware
    Posts
    2,907
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    May be the pedal, seen a few of them were the rubber strip inside came lose and causes this. Also does it do the same thing when you use the trigger on 2T?
    www.georgesplasmacuttershop.com
    Plasma Cutter and Welder Sales and Repairs--Ebay store
    Tec.Mo. Dealer Consumables for the PT and IPT torch's

  21. #2871
    Join Date
    Mar 2009
    Location
    Northern Virginia
    Posts
    297
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    Quote Originally Posted by mechanic416 View Post
    May be the pedal, seen a few of them were the rubber strip inside came lose and causes this. Also does it do the same thing when you use the trigger on 2T?
    I vaguely remember Something like this maybe not. Is your ground bombproof?

  22. #2872
    Join Date
    Mar 2009
    Location
    Northern Virginia
    Posts
    297
    Post Thanks / Like

    Re: AHP Owners/Users Thread. No Trolling unless you have used/own one!

    Quote Originally Posted by JHVA View Post
    Got a new 201xd (April 2020) just got around to using it for the first time. The foot pedal on 2T the arc continues after taking my foot off the pedal. Post flow works as it should. Same problem using trigger control 4T. Plugged into 110v outlet. The arc only stops after I pull away from the material. Anyone know what’s going on here? Do I have a bad board?
    Write customer service. He has seen it all and will respond in a few hours.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,606,994,479.88707 seconds with 14 queries