Results 1 to 3 of 3

Thread: Short video comparing the new Powermax30 Air with the older technology Powermax190C

  1. #1
    Join Date
    Oct 2007
    Location
    New Hampshire, North Carolina
    Posts
    3,336
    Post Thanks / Like

    Short video comparing the new Powermax30 Air with the older technology Powermax190C

    This video compares the older 190C which operated off 120 volts and could produce 12 amps of cutting power.....rated to sever up to 1/4". The new Powermax30 air can operate off either 120 volts or 230 volts, produces a full 30 amps of cutting power at 2500 watts. It is lighter, more powerful and can sever 1/2" with ease, production rated at 5/16".

    I will post another video shortly that compares the Powermax30 Air and the Powermax30XP.

    Jim Colt


  2. #2
    Join Date
    Jan 2008
    Location
    Richmond, Virginia
    Posts
    7,010
    Post Thanks / Like

    Re: Short video comparing the new Powermax30 Air with the older technology Powermax19

    Good job! Years ago I sold an electrical test machine that weighed maybe 600 pounds and the next generation was maybe 250 pounds. Back saver.
    "USMCPOP" First-born son: KIA Iraq 1/26/05
    Syncrowave 250 w/ Coolmate 3
    Dialarc 250, Idealarc 250
    SP-175 +
    Firepower TIG 160S (gave the TA 161 STL to the son)
    Lincwelder AC180C (1952)
    Victor & Smith O/A torches
    Miller spot welder

  3. #3
    Join Date
    Jun 2014
    Location
    SE Oklahoma
    Posts
    983
    Post Thanks / Like

    Re: Short video comparing the new Powermax30 Air with the older technology Powermax19

    Nice Jim ... looking forward to more video's!!
    Located In SE Oklahoma
    Lincoln Mig 135
    Hobart Ironman 230 Mig
    5x10 CNC Table with DTHC & FT
    Hypertherm PM65 on the table
    Miller Bobcat
    www.caneyagequipment.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,594,641,345.44178 seconds with 13 queries