WeldingWeb Journeyman
Going through some old pictures on the computer today and found a few photos...I always enjoy seeing what others have been working on, so figured I'd post a few of the projects that I have pictures from.
"Cross Box" for a David Brown tractor restoration - batteries go in each end compartment, toolbox under the seat, and the flat part with the 8 holes is where the seat sits - the holes give some fore-aft adjustment for the seat position.
WeldingWeb Journeyman
A few of the aluminum jobs I've worked on for a local fish farm
WeldingWeb Journeyman
New set of mounting ears on a ripper tooth - to fit a Case backhoe
WeldingWeb Journeyman
Residential Railing Install:
WeldingWeb Journeyman
Ditching bucket modified to wedge-style quick coupler:
WeldingWeb Journeyman
3 compartment seed and fertilizer bin...pictures are a little out of order:
WeldingWeb Foreman
You are currently my new hero. The boxes for the Case are sweet.
Arcon Workhorse 300MS
Powcon 400SMT
Powcon SM400 x 2
Powcon SM300
1968 SA200 Redface
1978 SA250 Diesel
Miller Super 32P Feeder
Pre 1927 American 14" High Duty Lathe
K&T Milwaukee 2H Horizontal Mill
Bryan
WeldingWeb Journeyman
New lift arm mechanism for cultivator - the old ones were bend and the geometry didn't give the cylinders enough power to lift the wings after the rolling baskets had been installed:
WeldingWeb Journeyman
Set of troughs and stands for the fish hatchery:
WeldingWeb Journeyman
Last one I've got for the moment....little set of hangers to suspend discharge pipe within a large culvert:
Master Welder
djd; nice work. looks factory built. no, better.Originally Posted by djd775
3 compartment seed and fertilizer bin...pictures are a little out of order:
i.u.o.e. # 15
queens, ny and sunny fla
WeldingWeb Foreman
Really nice work, looks like factory oem.
"The reason we are here is that we are not all there"
SA 200
Idealarc TM 300 300
MM 200
MM 251
30a Spoolgun
Precision Tig 375
Invertec V350 Pro
SC-32 CS 12 Wire Feeder
Oxweld/Purox O/A
ArcAir
Hypertherm Powermax 85
LN25
Master Welder
WOW!!! AWESOME work, for sure!!!
How do you cut the mounts for the buckets? I do bucket repairs, but not enough to afford a plasma table. But I like to do the highest quality work I can. Keep the pics comin
"Where's Stick man????????" - 7A749
"SHHHHHH!! I sent him over to snag that MIC-4 while tbone wasn't looking!" - duaneb55
"I have bought a few of Tbone's things unlike Stick-Man who helps himself" - TozziWelding
"Stick-man"
WeldingWeb Journeyman
Thanks!
Thanks
Thank you.
Thanks. I lucked out a couple years ago and found a used PlasmaCAM DHC2 for sale locally. I don't know if I'd have been able to get into a CNC setup if it wasn't for finding the deal that I did. I have a Hypertherm PM85 on it, and I built a mount for a Victor 310 machine torch that I run oxy-propane for squareness of cut in the heavy plate. It's the oxy-propane that I used to cut the bucket mounts.WOW!!! AWESOME work, for sure!!!
How do you cut the mounts for the buckets? I do bucket repairs, but not enough to afford a plasma table. But I like to do the highest quality work I can. Keep the pics comin
Sent from my iPhone using Tapatalk
WeldingWeb Journeyman
Some 1-1/2" plate that I was notching today for quick attach mods on a Terex loader. This is about as thick as I can fit on the table before gantry clearance becomes an issue.
I built a custom grate system with a removable section so I can cut up to 6x10 tubing...saved myself a lot of drilling on different projects by doing that.
Sent from my iPhone using Tapatalk
Posting Permissions
Reply With Quote