ReplyI believe you're mistaken. There is a [usually] hafnium-based electrode in the center of the copper tip.
Master Welder
I have the Miller 125c.
Put in new electrode and it won't fire up correctly.
Put in the old one and it works just fine.
Simple piece of copper- can't see why the new ones won't work.
Correct part number on packaging and they look identical.
Ed Conley
http://www.screamingbroccoli.com/
MM252
MM211 (Sold)
Passport Plus & Spool gun
Lincoln SP135 Plus- (Gone to a good home)
Klutch 120v Plasma cutter
SO 2020 bender
Beer in the fridge
Supporting Vendor
I believe you're mistaken. There is a [usually] hafnium-based electrode in the center of the copper tip.
Master Welder
@ Broccoli - never ran that cutter you have. This is the Miller 196925 electrode you need for your 125C plasma cutter.
Electodes are mostly Cu, with an axial "button" emitter of Hf, for cutter systems.
Last edited by ManoKai; 10-21-2016 at 04:43 PM.
"Discovery is to see what everybody else has seen, and to think what nobody else has thought" - Albert Szent-Gyorgyi
Master Welder
Yup
That's the part I got.
Ed Conley
http://www.screamingbroccoli.com/
MM252
MM211 (Sold)
Passport Plus & Spool gun
Lincoln SP135 Plus- (Gone to a good home)
Klutch 120v Plasma cutter
SO 2020 bender
Beer in the fridge
WeldingWeb Tradesman
Genuine OEM and not aftermarket?
Posting Permissions