Results 1 to 3 of 3

Thread: powermax1000

  1. #1
    Join Date
    Jul 2019
    Posts
    4
    Post Thanks / Like

    powermax1000

    hi , i am getting ready to connect a powermax 1000 to my portable cnc plasma machine , it is same machine as esab crossbow , but made in china
    the supplier is telling me that i need to run full arc voltage to thc on machine , my question is will i get full arc voltage from plug on back of machine or will i need to use terminals j 15 and j16 to get the correct voltage for thc ?

    thanks
    r brintle

  2. #2
    Join Date
    Sep 2013
    Posts
    155
    Post Thanks / Like

    Re: powermax1000

    Pretty sure the voltage in the plug on the back of the machine is divided. Canít remember the ratio offhand. If you need full arc voltage, I donít think you can get it from the plug.


    Sent from my iPhone using Tapatalk

  3. #3
    Join Date
    Oct 2007
    Location
    New Hampshire, North Carolina
    Posts
    3,337
    Post Thanks / Like

    Re: powermax1000

    You need to access the raw arc voltage inside the Power supply. details and illustrations for making the connections are in the Powermax1000 operators manual, or you can contact Hypertherm tech service and they can supply raw arc voltage details, technical.service@hypertherm.com or 1 800 643 9878 is the contact info. Jim Colt

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,604,002,280.99622 seconds with 11 queries