Results 1 to 3 of 3

Thread: WANTED: Linde/L-tec/Esab 1/16" V groove drive roll

  1. #1
    Join Date
    Jan 2020
    Location
    Pennsylvania
    Posts
    13
    Post Thanks / Like

    WANTED: Linde/L-tec/Esab 1/16" V groove drive roll

    Hi, I'm looking for a 1/16" V-groove drive roll to fit a Linde/L-tec/Esab SWM-23 or a MIG-35 wire feeder. The roll is about 2" in dia. and 1" wide with a 5/8" bore with a keyway. The center is plastic. I believe the part number is 2075299. If anyone has one they would sell or could recommend a source, I'd appreciate it. Thanks, Ed
    Lincoln DC 250 MK, Hobart MB 304, Miller Dialarc 250 HF, Syncrowave 300, 330 A/BP, Goldstar 300SS, SR-300, Maxstar 91, 140, 152, Westinghouse FlexArc 300 AC, 200 amp w/spool gun, Linde SVI 400, 450 pulse, SWM-23 & Mig 35 feeders, Cobramatic feeder

  2. #2
    Join Date
    Jul 2016
    Location
    Midwest
    Posts
    404
    Post Thanks / Like

    Re: WANTED: Linde/L-tec/Esab 1/16" V groove drive roll

    I believe the L-Tec / ESAB Digiming feeder used that feed roll as well.
    Thermal Arc 320SP ( Lorch )
    Cobra Pythons
    Thermal Arc 300 AC/DC ( Sanrex )
    ESAB 301i AC/DC ( Lorch )
    Thermal Arc 161STL ( WTL )
    Thermal Arc 190S ( Sanrex )
    Cut Master 82, 42. Cut45 ( WTL )
    Victor Gas Apps.
    Boxes and boxes of welding crap.

  3. #3
    Join Date
    Jan 2020
    Location
    Pennsylvania
    Posts
    13
    Post Thanks / Like

    Re: WANTED: Linde/L-tec/Esab 1/16" V groove drive roll

    Thanks for the input. I just did a little searching and found a manual for the Digimig. You're right, it does take the same drive rolls. This should help.
    Lincoln DC 250 MK, Hobart MB 304, Miller Dialarc 250 HF, Syncrowave 300, 330 A/BP, Goldstar 300SS, SR-300, Maxstar 91, 140, 152, Westinghouse FlexArc 300 AC, 200 amp w/spool gun, Linde SVI 400, 450 pulse, SWM-23 & Mig 35 feeders, Cobramatic feeder

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,603,152,645.57342 seconds with 11 queries