-
Re: 502 Bad Gateway
it’s definitely weird. i need to review from my desktop, have been on mobile so far this evening. it appears the 502s are triggered by user agents when posts get submitted, but i honestly am not sure yet :-S
-
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: 502 Bad Gateway
502 error on pol thread .
https://weldingweb.com/vbb/showthrea...2017!!/page531
I'm on my phone running Android with full site option on the chrome browser.
-
Re: 502 Bad Gateway
Someone posted, works now...
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: 502 Bad Gateway
502 on show what welded today https://weldingweb.com/vbb/showthrea...57#post8754057
On my phone , Android, chrome, show full site option.
No difference if I switch to mobi site option on chrome.
Last edited by ronsii; 06-13-2020 at 08:59 PM.
-
Re: 502 Bad Gateway
Hmmmmm. Works now, still has bls-repair as last post, only difference is 12v71 put a like on bls's post????
-
Re: 502 Bad Gateway
Funny thing
I got a 502 on a certain thread today on Tapatalk
So I fired up the laptop and it showed up fine.
I think there’s 502 error thing is some sort of bug within the system coming down randomly
Sent from my iPhone using Tapatalk Pro
Miller 211
Hypertherm PM 45
1961 Lincoln Idealarc 250
HTP 221
True Wisdom only comes from Pain.
-
Re: 502 Bad Gateway
But then again I don’t know jack **** about that sort of thing
Sent from my iPhone using Tapatalk Pro
Miller 211
Hypertherm PM 45
1961 Lincoln Idealarc 250
HTP 221
True Wisdom only comes from Pain.
-
Re: 502 Bad Gateway
Not really a 502 issue but maybe someone has some advice: Both at home in town with 50 mbps fiber, and out at the ranch with 10mbps dsl, everything is intermittent. Both are ATT. Desktop at home, laptop at ranch, so its not my router or pc causing this.
Speedtest at both sites meets spec but for example I had one Speedtest session time out half finished.
Any ideas? Anybody seeing system overload with so many working from home? That shouldn't persist into the late evening.
Comments welcome.
* Amico MIG-130A Flux, Dual Voltage. Truly portable!
* HF MIG-180 with all the mods. Heavy.
* Grizzly H8153 Stick/Tig 130/160.
* Wards PowrKraft AC-230. Stick & carbon arc.
-
-
Re: 502 Bad Gateway
robb
have you ever been an auto repair technician .... you would do good with the ladies..
Miller 211
Hypertherm PM 45
1961 Lincoln Idealarc 250
HTP 221
True Wisdom only comes from Pain.
-
502 bad gateway
BLM must have taken over the site. Can't open the political thread.
Mike
Ol' Stonebreaker
"Experience is the name everyone gives to their mistakes"
Hobart G-213 portable
Miller 175 mig
Miller thunderbolt ac/dc stick
Victor O/A setup
Makita chop saw
-
Re: 502 bad gateway
Only the last page won't open from here. If ever there was a thread that deserves a Bad Gateway designation it is that one.
---Meltedmetal
-
Re: 502 Bad Gateway
-
Re: 502 Bad Gateway
worked ok for me just now, 25 minutes later.
* Amico MIG-130A Flux, Dual Voltage. Truly portable!
* HF MIG-180 with all the mods. Heavy.
* Grizzly H8153 Stick/Tig 130/160.
* Wards PowrKraft AC-230. Stick & carbon arc.
-
Re: 502 Bad Gateway
Originally Posted by
Oscar
Both page 1 and 2 work for me on windows/firefox
-
-
Re: 502 Bad Gateway
There were a couple other reported 502's this morning but when I tried them they worked on my firefox... I didn't get a chance to try them on mobi or other platforms however.
-
Re: 502 Bad Gateway
Page #556 in the pol thread is coming up blank. https://weldingweb.com/vbb/showthrea...2017!!/page556 no error this time but strange???
EDIT:
Looks like it might be something with an embedded youtube video???
Last edited by ronsii; 06-25-2020 at 09:04 PM.
-
Post Thanks / Like - 1 Likes, 0 Dislikes
-
Re: 502 Bad Gateway
I'm seeing that too, weird.
-
Re: 502 Bad Gateway
I just tried emulating a bunch of different thins and they all fail somewhat differently... but still blank. I put a screenshot of the errors on my first post.
-
Re: 502 Bad Gateway
Originally Posted by
ronsii
I just tried emulating a bunch of different thins and they all fail somewhat differently... but still blank. I put a screenshot of the errors on my first post.
I tried changing my posts per page to a number of different settings and always get a blank or more than one blank page. I have no idea what's going on, but am having our database guy Mike look ASAP.
-
Re: 502 Bad Gateway
it was a post made by tackit that was a copy post from another site that was breaking the page with a bunch of HTML. I deleted it.
-
-
Re: 502 Bad Gateway
I’m getting a lot of these, also “error 404”.... the “website contact” information is INCORRECT ... since the website was sold
-
Re: 502 Bad Gateway
Hi LincTex, If you remember always try to put up a link to the offending page when something fails.
The contact info form probably just got missed during the changeover I'm sure Robbm will check it out now that you brought it to his attention
-
Post Thanks / Like - 1 Likes, 0 Dislikes