502 Bad Gateway

[Equilibrium]

I cleared my cache, shut down my computer, restarted it, and it still didn't work in Firefox. Tried it in Opera browser and it didn't work.
--
Now, it's working. Maybe vBulletin has a fix for this.
--
That other one is still not working- https://weldingweb.com/vbb/showthrea...he-woods/page3
The above is page 3 to this thread- https://weldingweb.com/vbb/showthrea...k-of-the-woods

[ronsii]

I cleared my cache, shut down my computer, restarted it, and it still didn't work in Firefox. Tried it in Opera browser and it didn't work.
--
Now, it's working. Maybe vBulletin has a fix for this.
--
That other one is still not working- https://weldingweb.com/vbb/showthrea...he-woods/page3
The above is page 3 to this thread- https://weldingweb.com/vbb/showthrea...k-of-the-woods

The neck of the woods page 3 won't work unless someone edits a post on page 3... I can't, so RobbM or someone else with mod power will have to do it.

Once I put another post on the karen thread you 'should' have been able to see it... because I checked with my firwefox browser and it came up along with several other test I did AFTER I put the 'test post' up using my firefox as a different agent.

[Robb M.]

i tried to edit a post on the woods thread page three. lmk is it made a difference please.

[ronsii]

just tried it... still comes up 502..?????


If I got into RDM mode in firefox and try different 'devices' here is what works and doesn't:

Works:
Galaxy note 9 , 3
I Phone 5/SE
All of the I phone X's
LG Optimus L70
Nexus 10(all models)
Pixel 2

Brings up 502 error:
I Pad
I Pad mini
Kindle fire HDX
All laptop models
Microsoft Lumia
Nokia 8110 4G


@ Robb M: I see your 'test edit' on my last post and really thought just changing one post would have made it work???? Wish I knew more specifics about why certain devices work and how they request the page from the server... it's kind of baffling???

[12V71]

And 502 again in off topic "one pic a week" thread.

[ronsii]

And 502 again in off topic "one pic a week" thread.

I put a test post in there, should work now.




the 520 error was from the post I put up in response to yours 12v71.. and I quoted you post.
https://weldingweb.com/vbb/showthrea...19#post8764519

[Equilibrium]

Sorry Robb M> Page 3 is still not working.

[Equilibrium]

Yet another bad gateway here-
https://weldingweb.com/vbb/showthrea...d-2020/page636
--
And page 3 is still a bad gateway here-
https://weldingweb.com/vbb/showthrea...he-woods/page3

[Robb M.]

why does that thread even exist? I don't think it belongs here on WW.

[Equilibrium]

I think others simply want to see "this neck of the woods" photos from across the country is all. That page 3 hasn't been able to be viewed for quite a while. If you've got the time to fix it, it would be very much appreciated.

[Robb M.]

I think others simply want to see "this neck of the woods" photos from across the country is all. That page 3 hasn't been able to be viewed for quite a while. If you've got the time to fix it, it would be very much appreciated.

I was talking about the politics thread. I can see page 3 of the other one, and don't know how/why some others can't. Nor do I know how to fix it :/

[Equilibrium]

I can't see page 3 and I've tried it from a laptop and the computer I normally use. All the photos on that page are gone... to me at least they are.
--
People are political. A long time ago I was a member of a gardening forum. They did what WW does with a separate off topic forum. It's been 15 years since I even logged on to that site though. I remember the biggie for them was sexual content of any sort as opposed to political. The quilting forum I used to use up until about 3 years ago had an off topic forum that included politics. They allowed off-color sexual jokes to an extent but not much because there are actually quite a few men who quilt and they were afraid it would make them uncomfortable. You had to be registered and I think you had to have 100 posts before you could even get in to see any of those threads to include the political threads. They called it the croc pit and you had to be over 18 to get in there. They said they did it that way to make their lives easier by rounding up and containing political and other off topic discussions to just one area so their other forums would stay focused and on topic. They had a sticky thread that said it cost them a lot of traffic when they tried banning all dirty jokes and political discussion so their solution was providing a "secret" forum that was "invisible" to outsiders and something called crawlers or maybe it was spiders so their members could post. They said if you posted something too dirty or political in an outside forum, you'd get a warning and then it went up from there to like month long suspensions. WW probably has their off topic forums for similar reasons. I'm still a member over there and my username is the same as it is here. If you want to go peek, I'll give you my password. Beware... your computer will get gunked up with ads for everything from fabric & notions to $10,000 quilting machines and something really horrible used to always show up after visiting called doubleclick although there were other ickies and nasties.

[ronsii]

502 error -- test post fix

I couldn't access this page of this 502 thread from any of my emulation modes??? but I am able to make a post to it from an earlier page, this should make it viewable again...

[danielplace]

Still at it. Bad gateway. Been that way for an hour. Usually couple tries it fixes itself. It isn't fixing itself this time.

Refuses to load second page of this thread. https://weldingweb.com/vbb/showthrea...ders-from-eBay

[ronsii]

Still at it. Bad gateway. Been that way for an hour. Usually couple tries it fixes itself. It isn't fixing itself this time.

Refuses to load second page of this thread. https://weldingweb.com/vbb/showthrea...ders-from-eBay

I just put a post on the second page... try it now.

also tried a dozen different devices and none of them gave me a 502 on either page 1 or page 2 of that thread..???

[smithdoor]

Any time get the message on my phone I switch to my PC and Edge.
The website likes my PC it may be has to with the mobile web page.

Dave

I was talking about the politics thread. I can see page 3 of the other one, and don't know how/why some others can't. Nor do I know how to fix it :/

[danielplace]

I just put a post on the second page... try it now.

also tried a dozen different devices and none of them gave me a 502 on either page 1 or page 2 of that thread..???

Just seen your post. Yea Windows 10 with Micro Edge is what laptop was running. Mine is the same way other people having issues with a thread but usually fine here. Actually that was first time I have got the 502 error in a really long time. It is never really a big deal. Wait it out it will return. Lol.

[Equilibrium]

Another bad gateway- https://weldingweb.com/vbb/showthrea...he-woods/page8
--
For what it's worth, I talked to two people in person from WW and they said they're getting them too.

[ronsii]

Another bad gateway- https://weldingweb.com/vbb/showthrea...he-woods/page8
--
For what it's worth, I talked to two people in person from WW and they said they're getting them too.

I posted a reply from page 7... and now it works for me

[Equilibrium]

Yes, thank you. It works.

[Equilibrium]

Another one in the show us what you welded today thread, https://weldingweb.com/vbb/showthrea...-today/page464

[ronsii]

Another one in the show us what you welded today thread, https://weldingweb.com/vbb/showthrea...-today/page464

I see BLS took care of it

[Hobbytime]

political thread..bad gateway just now, heres the link..

https://weldingweb.com/vbb/showthrea...d-2020/page655

[Robb M.]

how about now?

[Hobbytime]

how about now?

back up and running, thank you!!!!