Results 1 to 2 of 2

Thread: Wiring Invertig 221 to Australian power

  1. #1
    Join Date
    Mar 2015
    Posts
    33
    Post Thanks / Like

    Wiring Invertig 221 to Australian power

    I sometimes bring my Invertig 221 aboard ships that have 240V on one leg. I assume I would connect the brown lead to the 240v leg, the blue to the neutral, but is it necessary to connect the green lead to anything? Thanks in advance, machine is working out great!

  2. #2
    Join Date
    Jun 2012
    Location
    Laredo, Tx
    Posts
    5,108
    Post Thanks / Like

    Re: Wiring Invertig 221 to Australian power

    Quote Originally Posted by bakodiver View Post
    I sometimes bring my Invertig 221 aboard ships that have 240V on one leg. I assume I would connect the brown lead to the 240v leg, the blue to the neutral, but is it necessary to connect the green lead to anything? Thanks in advance, machine is working out great!
    Very good question. Probably more suited for the Electrical forum, but let's see what the experts say. According to this article, both leads are hot on a ship, there is no neutral. Pretty interesting if this is the case.
    1st on WeldingWeb to have a scrolling sig!

    HTP Invertig 400
    HTP Invertig 221
    HTP ProPulse 300
    HTP ProPulse 200 x2
    HTP ProPulse 220MTS
    HTP Inverarc 200TLP
    HTP Microcut 875SC

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,603,873,039.08794 seconds with 13 queries