Results 1 to 9 of 9

Thread: Victor swivel and lock adapter for cutting torch tip

  1. #1
    Join Date
    Oct 2015
    Posts
    2,665
    Post Thanks / Like

    Victor swivel and lock adapter for cutting torch tip

    I am retired and no longer need this. I was a Millwright and used this several time when I could not get a torch in the right position to cut. It is very handy for someone that gets into tight positions. I have never seen another one of these ever. I do not think they are made anymore. The end swivels 180 degrees and can lock anywhere it is put. It mounts to the end of victor cutting torch or can also be used on a victor machine torch like a track torch . It is probably 40 years old . It is well used but still works as it should. It could probably use some new O rings but it does work the way it is. I can not post picks because my internet is so poor. I can send a picture to a cell phone or and email address with my phone.
    $40 + shipping

  2. #2
    Join Date
    Sep 2013
    Location
    central Wis.
    Posts
    4,752
    Post Thanks / Like

    Re: Victor swivel and lock adapter for cutting torch tip

    Interested Gary. Send it in a text to central Wi area code. 3472151.

  3. #3
    Join Date
    Oct 2015
    Posts
    2,665
    Post Thanks / Like

    Re: Victor swivel and lock adapter for cutting torch tip

    MJD ; I sent a pick twice but my phone says it failed to send. This has happened to me before and it did go through. Did you get the pik?

  4. #4
    Join Date
    Sep 2013
    Location
    central Wis.
    Posts
    4,752
    Post Thanks / Like

    Re: Victor swivel and lock adapter for cutting torch tip

    No, nothing came thru.

  5. #5
    Join Date
    Oct 2014
    Posts
    2,254
    Post Thanks / Like

    Re: Victor swivel and lock adapter for cutting torch tip

    Is it like this. The price listed is crazy but they are available.

    https://pipelinedepot.com/products/c...e-bha-2-victor

  6. #6
    Join Date
    Oct 2015
    Posts
    2,665
    Post Thanks / Like

    Re: Victor swivel and lock adapter for cutting torch tip

    Yes that is it. Mine looks a little different but function is the same. Wow $350 is crazy. $40 is a deal at twice the price

  7. #7
    Join Date
    Sep 2013
    Location
    central Wis.
    Posts
    4,752
    Post Thanks / Like

    Re: Victor swivel and lock adapter for cutting torch tip

    Ok. It's different than I imagined. I'll have to pass.

  8. #8
    Join Date
    Mar 2015
    Posts
    633
    Post Thanks / Like

    Re: Victor swivel and lock adapter for cutting torch tip

    I'm interested if you still have it.

  9. #9
    Join Date
    Dec 2010
    Location
    Seattle
    Posts
    346
    Post Thanks / Like

    Re: Victor swivel and lock adapter for cutting torch tip

    We used to use those at the welding school beveling 1" plate. Used them on an Airco Radiagraph track burner. We would have called that a "bevel tip". They work fine. Lot of brass, probably one of those things that cost a fair bit to make and that has a very tiny market. That's probably why they retail for so much. I see them around, average used price maybe $30-40USD.

    metalmagpie

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,597,425,202.33054 seconds with 13 queries