Results 1 to 3 of 3

Thread: Amateur Stick Welder

  1. #1
    Join Date
    Apr 2020
    Location
    New York
    Posts
    6
    Post Thanks / Like

    Amateur Stick Welder

    Hello, Iím a new member, but not so new to welding. I first started as a young teen because my father and grandfather were struggling to get good welds, and somehow I had a knack. I continued to be the family welder just for our own steel projects. Iíve tried cast iron with some luck. Itís not my favorite, but sometimes necessary. Most of the time I have used one of our red Lincoln AC welders, and when I was more active, bought a Miller mig machine. I just came upon a Miller 180 AC/DC stick machine with the crank dial. That will afford me to weld with DC!

    Thanks for having me part of the group, Peter.

  2. #2
    Join Date
    Jun 2017
    Location
    AJO, ARIZONA
    Posts
    3,534
    Post Thanks / Like

    Re: Amateur Stick Welder

    Welcome! You will like the available choices with DC, both with rod selection and the ability to change polarity. I had DC availability at work but all by work at home was done on an old Craftsman 230 amp machine from the 70's & it's still going strong!
    IMPEACH BIDEN!
    NRA LIFE MEMBER

    UNITWELD 175 AMP 3 IN1 DC
    MIDSTATES 300 AMP AC MACHINE
    GOD HELP AMERICA!
    ďFreedom is never more than one generation away from extinction.
    We didnít pass it to our children in the bloodstream".
    RONALD REAGAN

  3. Likes PeterS liked this post
  4. #3
    Join Date
    May 2019
    Posts
    115
    Post Thanks / Like

    Re: Amateur Stick Welder

    Welcome, Peter. Good luck with your new welder!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,611,447,929.95342 seconds with 14 queries