Results 1 to 4 of 4

Thread: IPM chart for ironman230

  1. #1
    Join Date
    Sep 2018
    Location
    Boyne city, Michigan
    Posts
    18
    Post Thanks / Like

    IPM chart for ironman230

    Does anyone know if a IPM chart has been developed for the ironman230?
    Most references on calculators are in IPM

  2. #2
    Join Date
    Sep 2018
    Location
    Boyne city, Michigan
    Posts
    18
    Post Thanks / Like

    Re: IPM chart for ironman230

    Ok, what if I make a chart as well as voltage tap readings, are there any Ironman230 users that might find this useful information? I’ve been welding for quite a few years, but mig is a new process for me and trying to learn all I can

  3. #3
    Join Date
    Apr 2006
    Location
    Soda springs,Id
    Posts
    5,190
    Post Thanks / Like

    Re: IPM chart for ironman230

    I think mig is just like the old stick welders, you just keep adjusting until it welds right. At least with mig you have a chart inside the spool cover door to get you in the ball park.
    Mike
    Ol' Stonebreaker
    "Experience is the name everyone gives to their mistakes"
    Hobart G-213 portable
    Miller 175 mig
    Miller thunderbolt ac/dc stick
    Victor O/A setup
    Makita chop saw

  4. #4
    Join Date
    Sep 2018
    Location
    Boyne city, Michigan
    Posts
    18
    Post Thanks / Like

    Re: IPM chart for ironman230

    I have the Miller calculators for stick, tig and mig, yes I understand some fine tuning is always necessary, just like to start off close. When I watch the videos on you tube they always give voltage and inch per minute and would like to replicate the settings at my home, thanks for your input!


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,606,558,192.26951 seconds with 13 queries