Ok, what if I make a chart as well as voltage tap readings, are there any Ironman230 users that might find this useful information? I’ve been welding for quite a few years, but mig is a new process for me and trying to learn all I can
Does anyone know if a IPM chart has been developed for the ironman230?
Most references on calculators are in IPM
Ok, what if I make a chart as well as voltage tap readings, are there any Ironman230 users that might find this useful information? I’ve been welding for quite a few years, but mig is a new process for me and trying to learn all I can
I think mig is just like the old stick welders, you just keep adjusting until it welds right. At least with mig you have a chart inside the spool cover door to get you in the ball park.
Mike
Ol' Stonebreaker
"Experience is the name everyone gives to their mistakes"
Hobart G-213 portable
Miller 175 mig
Miller thunderbolt ac/dc stick
Victor O/A setup
Makita chop saw
I have the Miller calculators for stick, tig and mig, yes I understand some fine tuning is always necessary, just like to start off close. When I watch the videos on you tube they always give voltage and inch per minute and would like to replicate the settings at my home, thanks for your input!