Results 1 to 12 of 12

Thread: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

  1. #1
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    5,059
    Post Thanks / Like

    New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

    The new NOVA wire pedal has just been announced. Delivery should be in September sometime. It could be sooner, but we don't want to press the final stage.

    Price is going to list around 299.00

    Let us know if we can save you one.
    Attached Images Attached Images    
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

  2. #2
    Join Date
    Feb 2016
    Location
    S. WI
    Posts
    7
    Post Thanks / Like

    Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

    What kind of power does it use? I would want to change it over to 220 that way you won't need another cord to drag around with the welder.

  3. #3
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    5,059
    Post Thanks / Like

    Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

    120 for the dongle, and battery for the pedal. I am not 100% sure how the power would matter on this one. The rear connection would be eaten up (on our units) by the watercooler. How would you supply a low amp 240V voltage plug?
    Last edited by lugweld; 06-18-2020 at 10:53 AM.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

  4. #4
    Join Date
    Mar 2010
    Location
    Delaware
    Posts
    2,907
    Post Thanks / Like

    Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

    Is Everlast going to be selling that pedal for all the listed welders? What about the AHP, Lotos, Eastwood, Primeweld, Razorweld, etc. ? Are they going to be programable so if you have 2 or 3 welders in the shop they will not interfere with each other?
    Last edited by mechanic416; 06-18-2020 at 05:54 PM.
    www.georgesplasmacuttershop.com
    Plasma Cutter and Welder Sales and Repairs--Ebay store
    Tec.Mo. Dealer Consumables for the PT and IPT torch's

  5. #5
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    5,059
    Post Thanks / Like

    Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

    Right now these are for digitally controlled units. Will have to check on the future ones for non digitally controlled units.. The progammability issue is being resolved I think. I'll have to check. It will require a frequency switch, I am sure.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

  6. #6
    Join Date
    Feb 2016
    Location
    S. WI
    Posts
    7
    Post Thanks / Like

    Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

    I think it would be easy to tap off the power switch or from the cooler and mount another outlet on the back of the welder. There is no correct way to get 110 volt with out a neutral on 240 single phase. That's probably why the coolers are 220 also.

  7. #7
    Join Date
    Aug 2019
    Location
    northeastern PA.
    Posts
    90
    Post Thanks / Like

    Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

    Mark, have you used one yet? I might be interested in one if I can get hold of some reviews.

  8. #8
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    5,059
    Post Thanks / Like

    Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

    Still in final revision. Not yet used one.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

  9. #9
    Join Date
    Feb 2016
    Location
    S. WI
    Posts
    7
    Post Thanks / Like

    Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

    Got an ETA on these?

  10. #10
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    5,059
    Post Thanks / Like

    Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

    Just ending the final phase of testing for distance/ interference etc. All tested concerns seem to be clear. Final preproduction samples are being made now. Hopefully we will have stock by end of year.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

  11. #11
    Join Date
    Aug 2019
    Location
    northeastern PA.
    Posts
    90
    Post Thanks / Like

    Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

    are y'all lookin for testers?

  12. #12
    Join Date
    Nov 2008
    Location
    south GA where its hot in summer and cold in winter
    Posts
    5,059
    Post Thanks / Like

    Re: New NOVA Wireless Pedal for Lincoln, Miller, ESAB, HTP, and Everlast

    No, lol. We got plenty of those standing in line.
    Esab Migmaster 250
    Lincoln SA 200
    Lincoln Ranger 8
    Smith Oxy Fuel setup
    Everlast PowerPlasma 80
    Everlast Power iMIG 160
    Everlast Power iMIG 205
    Everlast Power iMIG 140E
    Everlast PowerARC 300
    Everlast PowerARC 140ST
    Everlast PowerTIG 255EXT

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,606,489,698.19247 seconds with 14 queries