Results 1 to 1 of 1

Thread: A real cage for my buddy's Can Am

  1. #1
    Join Date
    Aug 2018
    Post Thanks / Like

    A real cage for my buddy's Can Am

    Yup, yup got rid of the cheap 1.5" x.60 wall cage I am fabbing him up a real cage....1.75 x.120 wall.. I don't know if any of you use Hobart wire?? It is the first time for me. I usually use Lincoln. My machine, Lincoln 180 HD MIG was acting up. At times the feed was intermittent. Didn't know WTF, Messed up some of my welds..Might have to re-weld some area. Come to find out, towards the bottom of the wire spool, it was wrapped all funky and that prevented it from rolling straight and feeding clean.. Threw it in the trash, picked up some Lincoln MIG .30 wire, problem fixed!!!
    Attached Images Attached Images    
    Last edited by sapperb; 06-24-2020 at 03:30 PM.
    Welds last longer than Love...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Page generated in 1,606,847,797.43254 seconds with 14 queries