Results 1 to 3 of 3

Thread: MILLER OPTIMA wanted

  1. #1
    Join Date
    Jun 2020
    Posts
    5
    Post Thanks / Like

    MILLER OPTIMA wanted

    Hello,

    I have an XMT 350 cc/cv with a XR-D wire feed and an alumapro gun. Im welding 3/16" - 3/8" thick aluminum (kit boat 22ft).

    Im under the impression I can pulse weld with this setup by adding a Miller OPTIMA remote pulsing pendant control model number 043-389.

    Building another little boat and would love to be able to have the cleanliness/quality that pulse appears to be able to offer

    Anybody got one they can spare?

    Thanks
    Colby

  2. #2
    Join Date
    Jun 2020
    Posts
    5
    Post Thanks / Like

    Re: MILLER OPTIMA wanted

    Serial number starting with M

    wanted to clarify: by spare I mean sell for $$!

  3. #3
    Join Date
    May 2010
    Location
    Metro NYC, where taxes are extremely high, services low, and corruption is rampant
    Posts
    10
    Post Thanks / Like

    Re: MILLER OPTIMA wanted

    I replied to the thread you posted on before realizing that the thread was over three years old. I have a brand new, never used Optima pulser #043 389, s/n MA100031K. It's complete with Owner's Manual and the original shipping box and packing. If you are still interested PM me.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Page generated in 1,594,545,942.40771 seconds with 13 queries